What's new
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Samsung Galaxy S8 Edge+ (M706 MB V4.0) TESTED & Backup

Berdugo

Registered
Joined
Oct 30, 2014
Messages
1,127
Reaction score
19
Points
181
SAMSUNG M706 MB V4.0 TESTED
MT6572
preloader_m72_emmc_s6_pcb22_1024_jiafengtai_n5300
CM2 BACKUP

PASSWORD PROTECTED - USE TRIANGLE:D

https://mega.nz/#!BURHDR6Q!nbcjswswZXKPNbbkeDuAOq6BVUN_RxFhwaN2aCISRKU

CFrczL8.jpg


wrZJnlw.jpg




Scatter Load Ok , BaseBand : MT6572 , Project : m72_emmc_s6_pcb22_1024_jiafengtai_n , Storage : EMMC
Files found : 11 , Set to Flash : 10
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : alps
Device Model : m72_emmc_s6_pcb22_1024_jiafengtai_n5300_ddr1
Device CPU : MT6572
Device IntName : m72_emmc_s6_pcb22_1024_jiafengtai_n5300_ddr1
Device Version : 4.4.2
Device Compile : 12/6/2016 9:11:08 AM
Device Project : ALPS.JB3.MP.V1.12
Device ExtInfo : 889
Ready to Flash!

Operation : Flash [ v1.58 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 6 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x0005
BLVersion : 0x00FE
PreLoader : NOT Active [ Erased ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A2058494E594816B45DEAC14F45
Initialize Memory ...
DRAM configured from ScatFW!
DRAM initialize passed!
DRAM size : 0x20000000
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594816B45DEAC14F45
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID : 0xD2930E9DB4F2F1375D7CEDEC03EA26C9
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6572 , Project : m72_emmc_s6_pcb22_1024_jiafengtai_n , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

Switching to HSUSB
HSUSB Init Ok
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3681 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000001400000-0x0000000000100000
Erase : 0x0000000003100000-0x00000000E1F00000
Flash Pre-Erase Done, time used : 00:00:01

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_m72_emmc_s6_pcb22_1024_jiafengtai_n5300
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0013
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:02:17

Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Data Verify Done, time used : 00:00:28

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:03:05
Reconnect Power/Cable!

WLANG MAWAWALA KUNG HIT MO THANKS BOTTON
 
salamat sa pag share boss, pwede pa pm ng password. thanks
 
boss pa pm ng password
nid lang salamat
 
Last edited by a moderator:
salamat sa pagbahagi boss ..
 
boss pm po pasword... try ko po sa akin.... maraming salamat po
 
need password amo.. salam
 
Last edited by a moderator:
sir pa pm din ako ng pass need ko din po..
salamat
 
Back
Top