Samsung gt-s5380d deadboot done [ Reference ]

[BLIND]

GT-S5380D DEADBOOT..



RESSURECT OR REPAIR BOOT VIA MEDUSA JATG BOX..

RESOLDER JTAG PIN:



OPEN MEDUSA SOFTWARE EXE
SELECT CORRECT MODEL
SELECT EASY REPAIR MODE
CLICK EASY REPAIR
THEN SELECT CORRECT RESSURECTION FIRMWARE
AND THEN NEXT AND SO ON...



LOGS:

VREF = 0.0V is less than required level. Please check target device power supply.

Medusa JTAG Firmware version 1.1.0.

Medusa JTAG Hardware S64 revision C.

Detected TAP ID: 07B3617F, IR Length = 5.

JTAG speed : Auto (RTCK).

VREF level : 1.77 V

CPU : Broadcom BCM2155

Core ID : 07B3617F

Flash device: Samsung OneNAND KFG4GH6Q4M

Flash ID : 00EC0050

Page size : 4096 bytes

Block size : 64 pages (256 Kb)

Block count: 2048

Flash size : 512 Mb
Write protection disabled.

Opening "C:\Program Files\GsmServer\Medusa\Firmware\SAMSUNG_GTS5380D_R epair.mf" file...

Writing BOOT section. Please wait... Done
Writing UPCH section. Please wait...
Done
Disconnected
Repair done.


DONE:




NOTE: IN MOST CASES, AFTER REPAIR BOOT YOU NEED TO REFLASH FULL FIRMWARE BUT HERE LUCKILY I DID NOT.. FLASH IN ANY FLASHER SOFTWARE IF NEEDED..