Share ko lang mga sir kala ko wala na tong sulosyon . .
First step Download this Fw mababa lang Size niyan - https://rshrt.com/qMeO
at Ito pang tool - https://rshrt.com/0Rje
ito lang ginawa kung step pasundan nalang
1. Check your current HW and SW version with the following string: *#4986*2650468#
2. To set download mode on your device, you have to press Volume DOWN + Camera Key and Power Button.
3. Run S8530 Wave II downloader.
4. Select LSI
5. Tick Boot Change and and Tick Full Download
6. Click Boot and select Boot folder: (named as BOOTFILES)
7. Click AMSS and select : amss.bin
8. Click Apps and select : apps_compressed.bin
9. Click Rsrc1 and select : Rsrc_S8530_Open_Europe_Common.rc1
10. Click Rsrc2 and select : Rsrc2_S8530_Open_Euro_Common (Low/Mid).rc2
11. Click Factory FS and select : FactoryFs_S8530_Open_Europe_Common.ffs
12. Click CSC and select : S8530XXXXX.csc
13. Click SHP APP and select : ShpApp.app
14. Click FOTA and select : bplib_S8530OpEuroCommon.fota
15. After connecting the mobile with PC, Multiloader should find the COM port automatically. If it cannot find COM port please connect USB cable again and press port search.
16. Click Download [You will see the downloading progress bar].
17. After finishing downloading, the mobile will be starting automatically.
Sana makatulong paden mga sir salamat
First step Download this Fw mababa lang Size niyan - https://rshrt.com/qMeO
at Ito pang tool - https://rshrt.com/0Rje
ito lang ginawa kung step pasundan nalang
1. Check your current HW and SW version with the following string: *#4986*2650468#
2. To set download mode on your device, you have to press Volume DOWN + Camera Key and Power Button.
3. Run S8530 Wave II downloader.
4. Select LSI
5. Tick Boot Change and and Tick Full Download
6. Click Boot and select Boot folder: (named as BOOTFILES)
7. Click AMSS and select : amss.bin
8. Click Apps and select : apps_compressed.bin
9. Click Rsrc1 and select : Rsrc_S8530_Open_Europe_Common.rc1
10. Click Rsrc2 and select : Rsrc2_S8530_Open_Euro_Common (Low/Mid).rc2
11. Click Factory FS and select : FactoryFs_S8530_Open_Europe_Common.ffs
12. Click CSC and select : S8530XXXXX.csc
13. Click SHP APP and select : ShpApp.app
14. Click FOTA and select : bplib_S8530OpEuroCommon.fota
15. After connecting the mobile with PC, Multiloader should find the COM port automatically. If it cannot find COM port please connect USB cable again and press port search.
16. Click Download [You will see the downloading progress bar].
17. After finishing downloading, the mobile will be starting automatically.
Sana makatulong paden mga sir salamat
