Samsung i8160 jtag error pls help

[ant-man]

Z3X EasyJtag Software ver. 2.2.0.1
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: 0800D0219F83B, ,FW Ver.: 01.55CMD Pullup Level:2072 mV
CMD Active Level:2516 mV
Box IO Level:3300 mV
CLK Rate:3000 khz
HiPower mode is off!
---------- eMMC Device Information ----------EMMC CID : 45010053454D30344730073E12D150C6
EMMC CSD : D00F00320F5903FFFFFFFDFF8A4040A6
EMMC Manufacturer ID: 0045 , OEM ID: 0100
EMMC Date: 05/2013 Rev.0x30
EMMC NAME: SEM04G , S/N: 121508561
EMMC NAME (HEX): 53454D30344700
Can't init EMMC, Reason: CARD Data FIFO Timeout Error
Check Data Line!
Done pa tulong nman mga master

 

[ant-man]

Up up lng po mga master

 

[RemliG]

sad to say idol....EMMC na po may tama

Can't init EMMC, Reason: CARD Data FIFO Timeout Error

 

[rodel17]

EMMC na po may tama......idol

 

[airforce_one]

eMMC Device Information ----------EMMC CID : 45010053454D30344730073E12D150C6
EMMC CSD : D00F00320F5903FFFFFFFDFF8A4040A6

EMMC info are intact.

if ang history biglaan na dead posible HW nga ang problem.
pero kung na dead by software sure mabubuhay iyan.

try adjust baudtrate.try restart pc,try replace wires.

 

[ant-man]

Sir na try ko na rin palit ng wires na detect but may error pa rin po siya baka emmc na nga tama nia thanks vice admin sa rply at sa inyo lahat mga sirs