- Joined
- Jun 13, 2014
- Messages
- 56
- Reaction score
- 0
- Points
- 1
Oldies but Goodies may natira pa pala
Phone:
Samsung i9003
Phone Problem:
Hang on Samsung Logo
Action taken:
1. Hard Reset using Volume Up + Home+Power, can't mount sdcard
2. Flash via Odin , same result can't mount sdcard

3. dismantle the phone and and carefully remove the EMMC from PCB



Note: removing sealded EMMC heat must not exceed 150 degree may pyesa sa ilalim na sealded din na pwedeng mag cause ng no power, kaya ingat po sa pagbaklas wag po madaliin...
4. After remove the EMMC disassemble the phone and prepared a new Class 10 MMC and Insert to phone but in case may pamalit po kayo much better to replace EMMC wala kasi kong pamalit kaya alternative solution

Note: why class 10...sa ordinary mmc resulting for phone hanging in camera
5. Flash the phone Using ODIN with this ODIN 1.83 and i9003XXKPE firmware or any compatible firmware


6. After flashing and setup phone you will notice that camera is not working

7. Root the phone, I use kingRoot to root the phone, or use your favorite rooting software u want


8. After Root If have MyPhoneExplorer open the software if wala po , download first muna the install po sa PC
9. In Myphone Explorer Make a message with the txt below and save to drafts

10. Install RootExplorer Using MyPhoneExplorer or to any Installation of apk you prepared for your work


11.Open RootExplorer icon in Phone Menu, Go to system/etc
12. Click [mount R/W] at the upper right side

13. Open vold.fstab as text editor

14. Delete all data from vold.fstab and replace with text under Instruction no. 9, yung message save sa drafts


15. Save changes and Reboot your phone
Finish Product

DONE
Camera are working perfectly and no signs of hang
Thanks for viewing
Phone:
Samsung i9003
Phone Problem:
Hang on Samsung Logo
Action taken:
1. Hard Reset using Volume Up + Home+Power, can't mount sdcard
2. Flash via Odin , same result can't mount sdcard

3. dismantle the phone and and carefully remove the EMMC from PCB



Note: removing sealded EMMC heat must not exceed 150 degree may pyesa sa ilalim na sealded din na pwedeng mag cause ng no power, kaya ingat po sa pagbaklas wag po madaliin...
4. After remove the EMMC disassemble the phone and prepared a new Class 10 MMC and Insert to phone but in case may pamalit po kayo much better to replace EMMC wala kasi kong pamalit kaya alternative solution


Note: why class 10...sa ordinary mmc resulting for phone hanging in camera
5. Flash the phone Using ODIN with this ODIN 1.83 and i9003XXKPE firmware or any compatible firmware


6. After flashing and setup phone you will notice that camera is not working

7. Root the phone, I use kingRoot to root the phone, or use your favorite rooting software u want


8. After Root If have MyPhoneExplorer open the software if wala po , download first muna the install po sa PC
9. In Myphone Explorer Make a message with the txt below and save to drafts
## Vold 2.0 Generic fstab
## - San Mehat (san@android.com)
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
{
mount_deep = 1
ums_path = /sys/devices/platform/musb_hdrc/gadget/lun0/file
asec = enable
mbr_policy = overwrite
}
dev_mount sdcard1 /mnt/sdcard/external_sd 1 /devices/platform/mmci-omap-hs.1/mmc_host/mmc0
# externel sdcard
{
mount_deep = 0
ums_path = /sys/devices/platform/musb_hdrc/gadget/lun1/file
asec = disable
discard = enable
mbr_policy = skip
}
dev_mount sdcard /mnt/sdcard 1 /devices/platform/mmci-omap-hs.0/mmc_host/mmc1
#end line ## keep this line

10. Install RootExplorer Using MyPhoneExplorer or to any Installation of apk you prepared for your work


11.Open RootExplorer icon in Phone Menu, Go to system/etc
12. Click [mount R/W] at the upper right side

13. Open vold.fstab as text editor

14. Delete all data from vold.fstab and replace with text under Instruction no. 9, yung message save sa drafts


15. Save changes and Reboot your phone
Finish Product

DONE
Camera are working perfectly and no signs of hang
Thanks for viewing