mga lodi!! anu kaya probs nito j100ml pasilip nga ako sa mga jtagers jan kuing anu probs..my tama na kaya EMMC niya...
eMMC_tool Suite ver. 1.4.9.0 (release date: 12.12.2017)
Microsoft Windows 7 (64 bit) build 7601 (6.1.7600.16385)
Looking for EasyJTAG box...
EasyJTAG API ver. 2022
EasyJTAG Box Serial = 1E9C444BB00C2C22
Card Serial = AA4A-99F2
EasyJTAG Box Firmware = 2.21
Changelog:
12.12.2017 (ver 1.4.9.0)
Fix: Bugs that have been found through your crash report
Fix: RandomVerify function
Fix: Creation of GPT for Samsung (write by vendor)
Fix: Failed to mount large Fat partitions (explorer)
Fix: Extraction from contact2.db (explorer)
Fix: Error in the "build.prop" parser
Fix: CID Parser
Add: Support for EasyJtag Plus Box
Add: Path for TempDir and InitialDir (option in settings)
Add: Unpack Lenovo QSB (utilities)
Add: Selecting a PIT file from CSC (write by vendor Samsung)
Add: Detect for encrypted dumps from GPG Box
Add: Detect for FullDiskEncryption Partition (explorer)
Add: LinearVerify of the Partition (read by vendor)
Add: Information base about emmc compatibility (thanks to phonemicrodb)
Add: Resizing the window (for small screen resolutions)
Add: Converting large partitions in SparseImage when reading by vendor (option in settings)
Add: Mounting SparseImage (explorer)
Add: Automatic backup of the EFS partition for Samsung (read by vendor)
Add: Formatting of EFS partition for Samsung on request (write by vendor)
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 36 Mhz
CMD Pullup Level: 2047 mV
CMD Active Level: 2673 mV
EMMC Device Information :
EMMC CID: 90014A483447326211019BB28807221F
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DB
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H4G2b , EMMC NAME (HEX): 483447326200 , S/N: 9BB28807 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 2/2015
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G2b_9BB28807_20180421_122504.extcsd
EMMC Init completed.
Opening file: J13G.pit
Pit: J13G.pit
Entry count: 29
The size of the last section has been updated
J100MLDXU0APB2_J100MLOLC0APB2_J100MLDXU0APB1_HOME.tar.md5
The list of files in the firmware:
boot.img
recovery.img
system.img
sprdcp.img
sprddsp.img
nvitem.bin
cache.img
hidden.img
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 36 Mhz
CMD Pullup Level: 2044 mV
CMD Active Level: 2672 mV
EMMC Device Information :
EMMC CID: 90014A483447326211019BB28807221F
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DB
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H4G2b , EMMC NAME (HEX): 483447326200 , S/N: 9BB28807 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 2/2015
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G2b_9BB28807_20180421_122529.extcsd
EMMC Init completed.
Operation: Write by vendor (Samsung)
Creating GPT-partitioninig
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #1
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #2
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #3
Writing PIT at address: 000000004400
GPT-partitioning done
Unpacking file: nvitem.bin
Unpacking file: sprddsp.img
Unpacking file: sprdcp.img
Unpacking file: boot.img
Partition name: WFIXNV2
Filename: nvitem.bin , Offset: 000000900000 , filesize: 174856 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 2732.26 KB/s
Partition name: WDSP
Filename: sprddsp.img , Offset: 000000C00000 , filesize: 1968128 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3906.03 KB/s
Partition name: MODEM
Filename: sprdcp.img , Offset: 000001000000 , filesize: 7399968 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3952.30 KB/s
Partition name: KERNEL
Filename: boot.img , Offset: 000004500000 , filesize: 5688320 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3965.62 KB/s
Partition HIDDEN : formatting as EXT4. Please wait ...
Error: mkfs error (95)
All done time: [00:00:12:105]
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 36 Mhz
CMD Pullup Level: 2043 mV
CMD Active Level: 2670 mV
EMMC Device Information :
EMMC CID: 90014A483447326211019BB28807221F
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DB
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H4G2b , EMMC NAME (HEX): 483447326200 , S/N: 9BB28807 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 2/2015
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G2b_9BB28807_20180421_122604.extcsd
EMMC Init completed.
Operation: Write by vendor (Samsung)
Creating GPT-partitioninig
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #1
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #2
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #3
Writing PIT at address: 000000004400
GPT-partitioning done
Unpacking file: nvitem.bin
Unpacking file: sprddsp.img
Unpacking file: sprdcp.img
Unpacking file: boot.img
Unpacking file: recovery.img
Unpacking file: cache.img
Unpacking file: system.img
Unpacking file: hidden.img
Partition name: WFIXNV2
Filename: nvitem.bin , Offset: 000000900000 , filesize: 174856 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 2727.11 KB/s
Partition name: WDSP
Filename: sprddsp.img , Offset: 000000C00000 , filesize: 1968128 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3752.88 KB/s
Partition name: MODEM
Filename: sprdcp.img , Offset: 000001000000 , filesize: 7399968 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3882.55 KB/s
Partition name: KERNEL
Filename: boot.img , Offset: 000004500000 , filesize: 5688320 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3967.24 KB/s
Partition name: RECOVERY
Filename: recovery.img , Offset: 000005500000 , filesize: 7019520 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3979.26 KB/s
Partition name: CSC
Filename: cache.img , Offset: 000006500000 , filesize: 46842128 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 15
Done writing partition. Write speed: 4013.18 KB/s
Partition name: SYSTEM
Filename: system.img , Offset: 000012D00000 , filesize: 961283904 bytes
eMMC switching to ROM1
Erasing partition...
Error erasing at address: 000040EA0000 , error: -100, CARD Status Error ... Retry #1
Writing partition...
Sparse image found v.1.0 Total chunks: 1650
Done writing partition. Write speed: 3973.21 KB/s
Partition name: HIDDEN
Filename: hidden.img , Offset: 000053D00000 , filesize: 22634816 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 18
Done writing partition. Write speed: 3998.56 KB/s
All done time: [00:04:46:739]
eMMC_tool Suite ver. 1.4.9.0 (release date: 12.12.2017)
Microsoft Windows 7 (64 bit) build 7601 (6.1.7600.16385)
Looking for EasyJTAG box...
EasyJTAG API ver. 2022
EasyJTAG Box Serial = 1E9C444BB00C2C22
Card Serial = AA4A-99F2
EasyJTAG Box Firmware = 2.21
Changelog:
12.12.2017 (ver 1.4.9.0)
Fix: Bugs that have been found through your crash report
Fix: RandomVerify function
Fix: Creation of GPT for Samsung (write by vendor)
Fix: Failed to mount large Fat partitions (explorer)
Fix: Extraction from contact2.db (explorer)
Fix: Error in the "build.prop" parser
Fix: CID Parser
Add: Support for EasyJtag Plus Box
Add: Path for TempDir and InitialDir (option in settings)
Add: Unpack Lenovo QSB (utilities)
Add: Selecting a PIT file from CSC (write by vendor Samsung)
Add: Detect for encrypted dumps from GPG Box
Add: Detect for FullDiskEncryption Partition (explorer)
Add: LinearVerify of the Partition (read by vendor)
Add: Information base about emmc compatibility (thanks to phonemicrodb)
Add: Resizing the window (for small screen resolutions)
Add: Converting large partitions in SparseImage when reading by vendor (option in settings)
Add: Mounting SparseImage (explorer)
Add: Automatic backup of the EFS partition for Samsung (read by vendor)
Add: Formatting of EFS partition for Samsung on request (write by vendor)
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 36 Mhz
CMD Pullup Level: 2047 mV
CMD Active Level: 2673 mV
EMMC Device Information :
EMMC CID: 90014A483447326211019BB28807221F
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DB
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H4G2b , EMMC NAME (HEX): 483447326200 , S/N: 9BB28807 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 2/2015
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G2b_9BB28807_20180421_122504.extcsd
EMMC Init completed.
Opening file: J13G.pit
Pit: J13G.pit
Entry count: 29
The size of the last section has been updated
J100MLDXU0APB2_J100MLOLC0APB2_J100MLDXU0APB1_HOME.tar.md5
The list of files in the firmware:
boot.img
recovery.img
system.img
sprdcp.img
sprddsp.img
nvitem.bin
cache.img
hidden.img
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 36 Mhz
CMD Pullup Level: 2044 mV
CMD Active Level: 2672 mV
EMMC Device Information :
EMMC CID: 90014A483447326211019BB28807221F
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DB
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H4G2b , EMMC NAME (HEX): 483447326200 , S/N: 9BB28807 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 2/2015
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G2b_9BB28807_20180421_122529.extcsd
EMMC Init completed.
Operation: Write by vendor (Samsung)
Creating GPT-partitioninig
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #1
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #2
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #3
Writing PIT at address: 000000004400
GPT-partitioning done
Unpacking file: nvitem.bin
Unpacking file: sprddsp.img
Unpacking file: sprdcp.img
Unpacking file: boot.img
Partition name: WFIXNV2
Filename: nvitem.bin , Offset: 000000900000 , filesize: 174856 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 2732.26 KB/s
Partition name: WDSP
Filename: sprddsp.img , Offset: 000000C00000 , filesize: 1968128 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3906.03 KB/s
Partition name: MODEM
Filename: sprdcp.img , Offset: 000001000000 , filesize: 7399968 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3952.30 KB/s
Partition name: KERNEL
Filename: boot.img , Offset: 000004500000 , filesize: 5688320 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3965.62 KB/s
Partition HIDDEN : formatting as EXT4. Please wait ...
Error: mkfs error (95)
All done time: [00:00:12:105]
Setting interface to EasyJtag2/ISP_HiPower
Setting bus width to 1 Bit
HiPower mode is ON
Setting frequence to 36 Mhz
CMD Pullup Level: 2043 mV
CMD Active Level: 2670 mV
EMMC Device Information :
EMMC CID: 90014A483447326211019BB28807221F
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DB
EMMC Manufacture Name: SKHYNIX , EMMC NAME: H4G2b , EMMC NAME (HEX): 483447326200 , S/N: 9BB28807 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Manufacture Date: 2/2015
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G2b_9BB28807_20180421_122604.extcsd
EMMC Init completed.
Operation: Write by vendor (Samsung)
Creating GPT-partitioninig
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #1
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #2
Error writing at address: 000000000000 , error: 34 , 34 Unknown error ... Retry #3
Writing PIT at address: 000000004400
GPT-partitioning done
Unpacking file: nvitem.bin
Unpacking file: sprddsp.img
Unpacking file: sprdcp.img
Unpacking file: boot.img
Unpacking file: recovery.img
Unpacking file: cache.img
Unpacking file: system.img
Unpacking file: hidden.img
Partition name: WFIXNV2
Filename: nvitem.bin , Offset: 000000900000 , filesize: 174856 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 2727.11 KB/s
Partition name: WDSP
Filename: sprddsp.img , Offset: 000000C00000 , filesize: 1968128 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3752.88 KB/s
Partition name: MODEM
Filename: sprdcp.img , Offset: 000001000000 , filesize: 7399968 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3882.55 KB/s
Partition name: KERNEL
Filename: boot.img , Offset: 000004500000 , filesize: 5688320 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3967.24 KB/s
Partition name: RECOVERY
Filename: recovery.img , Offset: 000005500000 , filesize: 7019520 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Done writing partition. Write speed: 3979.26 KB/s
Partition name: CSC
Filename: cache.img , Offset: 000006500000 , filesize: 46842128 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 15
Done writing partition. Write speed: 4013.18 KB/s
Partition name: SYSTEM
Filename: system.img , Offset: 000012D00000 , filesize: 961283904 bytes
eMMC switching to ROM1
Erasing partition...
Error erasing at address: 000040EA0000 , error: -100, CARD Status Error ... Retry #1
Writing partition...
Sparse image found v.1.0 Total chunks: 1650
Done writing partition. Write speed: 3973.21 KB/s
Partition name: HIDDEN
Filename: hidden.img , Offset: 000053D00000 , filesize: 22634816 bytes
eMMC switching to ROM1
Erasing partition...
Writing partition...
Sparse image found v.1.0 Total chunks: 18
Done writing partition. Write speed: 3998.56 KB/s
All done time: [00:04:46:739]