SAMSUNG J106B hang logo.. makunat.. done sa z3x pro

[sarsarcuadra]

magandang gabi mga bossing......


may tanggap po akong J106B hang logo..

ito po ginamit kong

firmware:

ito po yong unang firmware ginamit ko

http://gsm-firmware.com/index.php?a=browse&b=category&id=5549
hang logo at restart parin..

download ako sa z3x pro ito po gamit ko

COMBINATION_UUB_FA60_J106BUBU0AQA1_UUBFAC galing yan sa z3x pro


pagkatapos hindi na nag restart, pero hindi completo yong program nya..

kaya binalikan ko ang firmware nato

http://gsm-firmware.com/index.php?a=browse&b=category&id=5549

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-J106B
Software version: 33.2

File analysis... OK
Total file size: 0x97F72D10 (2431 Mb)
Searching USB Flash interface... COM72 detected
Setup connection... OK
Reading PIT from phone... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Flashing done (time - 00:04:09)

Done with Samsung Tool PRO v.33.2

done na xa.. pacinxa walang picture kasi excited ang customer...

 

[Junel_05]

galing mo talaga boss... hehe congrats

 

[akmier]

still hang sakin,,emmc na tama nito,,salamat sa pg bahage

 

[arvinzx20]

di working sakion yung combi bosing stuck lang sa kernel panic upload mode