samsung J120A unlock by z3x pro v30.7
open z3x dial *#0808#
salpak ang usb cable
una read code & new code no luck
2 step try ko unlock no luck padin kailangan downgrade..
3.step root ayaw din no luck
4.step try ko read code DIAG ayun sapol..
UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.
To unlock OLD security type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.
To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Read codes' button to read security codes.
To read security codes via diagnostic port:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes DIAG' button to read security codes.
To reset Google account activation or Samsung reactivation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)
Operation: Read Codes DIAG
Selected model: SM-J120A
Software version: 30.7
Checking hash file... OK
Searching Samsung modem... detected COM11
Reading phone info... OK
Model: SM-J120A
AP version: J120AUCS2AQB1
CSC version: J120AATT2AQB1
CP version: J120AUCS2AQB1
Product code: SM2J120AZWCATT
Phone SN: R58HA0NWDVT
Unique number: CFN00620CC41E83
Searching Samsung diag port... detected COM10
Reading phone info... OK
CP version: J120AUCS2AQB1
CP build: Feb 7 2017 18:01:12
Reading data from phone... OK
Reading NV data... OK
Modem board: SHANNON308
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:37)
Freeze code: 85735858
NET lock: 82753939
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.30.7
ito po picture.pa ki view nalang po
Imgur: The magic of the Internet
open z3x dial *#0808#
salpak ang usb cable
una read code & new code no luck
2 step try ko unlock no luck padin kailangan downgrade..
3.step root ayaw din no luck
4.step try ko read code DIAG ayun sapol..
UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.
To unlock OLD security type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.
To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Read codes' button to read security codes.
To read security codes via diagnostic port:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes DIAG' button to read security codes.
To reset Google account activation or Samsung reactivation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
(Sometimes needs to perform 'wipe data/factory reset' once more, to complete this locks removal.)
Operation: Read Codes DIAG
Selected model: SM-J120A
Software version: 30.7
Checking hash file... OK
Searching Samsung modem... detected COM11
Reading phone info... OK
Model: SM-J120A
AP version: J120AUCS2AQB1
CSC version: J120AATT2AQB1
CP version: J120AUCS2AQB1
Product code: SM2J120AZWCATT
Phone SN: R58HA0NWDVT
Unique number: CFN00620CC41E83
Searching Samsung diag port... detected COM10
Reading phone info... OK
CP version: J120AUCS2AQB1
CP build: Feb 7 2017 18:01:12
Reading data from phone... OK
Reading NV data... OK
Modem board: SHANNON308
Checking NV data... OK
Calculating... OK
Please wait, calculating codes... OK (time - 00:00:37)
Freeze code: 85735858
NET lock: 82753939
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#
Done with Samsung Tool PRO v.30.7
ito po picture.pa ki view nalang po
Imgur: The magic of the Internet