samsung J330f Unlocked naging Custom binary block by frp. Help!

[SantinO]

Samsung j330f unlock ko sana , pagkatapos ma red codes via server biglang nag custom binary block by frp na

ito logs



UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will appear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever ('Diag' algo):
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone using sever.
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes via server' button, select 'Diag', write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings)

Reading codes using sever ('Upload' algo):
Knox warranty does not matter.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, select 'Upload' write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Reading codes using sever ('New' algo):
Knox warranty does not matter.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, select 'New' write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-J330F
Software version: 34.11

Checking Login and Password... OK
Ballance: 15 crd.
You have 15 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-J330F
Android version: 7.0
PDA version: J330FXXU1AQI2
CSC version: J330FNEE1AQI1
Phone version: J330FXXU1AQF7
Product code: SM-J330FZKDNEE
CSC country code: Nordic
CSC sales code: NEE
Phone SN: R58JC308SNN
IMEI: 353757096306764
HW version: MP 0.500
RF cal date: 20171220
Chip name: EXYNOS7570
Modem board: SHANNON305
Security patch: 2017-08-01
Boot Warranty bit: 1
SIM State: NETWORK_LOCKED,NETWORK_LOCKED
Initialization zTool... OK
Running zTool, please wait... OK
Reading data from phone... OK
Searching server... OK
Checking server answer... OK
Executing... OK
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 97207971
NET lock: 92738039
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
SIM lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.34.11

 

[SantinO]

PDA version: J330FXXU1AQI2
CSC version: J330FNEE1AQI1
baka may AP file lang kayo jan para mabilis ko lang ma DL mga master

 

[undreath]

rooted siguro yang phone boss tapos narestart mo na naka on OEM nya kaya nagkaganyan.

DL kana lang sa support ng z3x boss binary 1 pala yan kahit di sakto sa file nya basta binary 1 pasok yan boss.

 

[SantinO]

rooted siguro yang phone boss tapos narestart mo na naka on OEM nya kaya nagkaganyan.

DL kana lang sa support ng z3x boss binary 1 pala yan kahit di sakto sa file nya basta binary 1 pasok yan boss.

naka off oem nito boss kasi naka onn ako na nag off bago ko gawin.
cguro rooted na talaga to naka enter puk lock na kasi

downloading na boss kaso ang bagal ng net ko ngayon, 5 hours downloading sa full firmware

 

[undreath]

download mode mo boss andun yan kung nka on nga. may naencounter ako nyan s7 nga lang yun buti na lang no need na iflash kasi support sya sa z3x via Reset FRP UFS kaya madali ko nagawa.

try mo to boss https://www.getdroidtips.com/j330fxxu1aqi2-august-galaxy-j3-2017/ nasa baba yung link tapos choose slow speed wait mo 30 sec tapos type capcha para madownload.

 

[SantinO]

download mode mo boss andun yan kung nka on nga. may naencounter ako nyan s7 nga lang yun buti na lang no need na iflash kasi support sya sa z3x via Rest FRP UFS kaya madali ko nagawa.

try mo to boss https://www.getdroidtips.com/j330fxxu1aqi2-august-galaxy-j3-2017/ nasa baba yung link tapos choose slow speed wait mo 30 sec tapos type capcha para madownload.

cge try ko boss TIA

 

[jeiser16]

boss download ka na lang po firmware sa z3x po ok na po yan...then flash po

 

[SantinO]

Paki close thread nalang mga master ok na ang unit, full flash ko lang nito J330FXXU3BRK3_SIM3BRK3, sa download support ng z3x ako kumuha ng firmware.
Salamat. sa lahat ng nag rply

 

[livestrong]

try this sir


Password : rootandroidz.com