directions
---sa software---
open octoplus frp tool
sa device vendor,select samsung.
sa device model,select sm-j510s.
sa com port huwag na galawin.
---sa phone---
Press and hold "Volume-" + "Home" + "Power ON" keys.
When phone turns on, press "Volume+" key.
install drivers if wala pa
---sa software---
tick reset frp (download mode)'
connect phone sa pc
magdodownload si octo ng resource files for j5 2016
follow software instructions
disconnect phone,turn-off and download mode ulit
press 'ok' sa software
follow software instructions
connect again,mag-rereset frp yan at magsa-success sa software..
pero anjan pa rin si frp nang i-power on mo..
ito yung tricks
reboot mo si phone
connect again at automatic activated na ang adb (dahil dun sa resource file)
so proceed..
---sa software---
open octoplus frp tool
sa device vendor,select samsung.
sa device model,select sm-j510s.
sa com port huwag na galawin.
---sa phone---
power on mo lng
---sa software---
tick on 'reset frp adb'(combination)
connect si j5 2016 at press ok kung may lalabas na 'usb debug confirmation'
dapat bantayan nyu ng maigi si phone lalabas at lalabas yan usb debugging
mag-hentai..
ayan ss lng po ng software..nagmamadali si tomer at wala akong cp na pangpicture..
huwag nyu na akong hanapan ng ss ng phone..
100% working po 'to itataya ko pa betlog ko..
---sa software---
open octoplus frp tool
sa device vendor,select samsung.
sa device model,select sm-j510s.
sa com port huwag na galawin.
---sa phone---
Press and hold "Volume-" + "Home" + "Power ON" keys.
When phone turns on, press "Volume+" key.
install drivers if wala pa
---sa software---
tick reset frp (download mode)'
connect phone sa pc
magdodownload si octo ng resource files for j5 2016
follow software instructions
disconnect phone,turn-off and download mode ulit
press 'ok' sa software
follow software instructions
connect again,mag-rereset frp yan at magsa-success sa software..
pero anjan pa rin si frp nang i-power on mo..
ito yung tricks
reboot mo si phone
connect again at automatic activated na ang adb (dahil dun sa resource file)
so proceed..
---sa software---
open octoplus frp tool
sa device vendor,select samsung.
sa device model,select sm-j510s.
sa com port huwag na galawin.
---sa phone---
power on mo lng
---sa software---
tick on 'reset frp adb'(combination)
connect si j5 2016 at press ok kung may lalabas na 'usb debug confirmation'
dapat bantayan nyu ng maigi si phone lalabas at lalabas yan usb debugging
mag-hentai..
ayan ss lng po ng software..nagmamadali si tomer at wala akong cp na pangpicture..
huwag nyu na akong hanapan ng ss ng phone..
100% working po 'to itataya ko pa betlog ko..
