iTelecom
Registered
tools:
Z3X pro
usb data cable
1st need muna root yung unit
dl muna ito
ito procedure pag root
Step by Step Instructions
STEP 1 : Connect your phone to your computer & Allow access to your device when the MTP Connection box pops up
STEP 2 : Now go to the ROOT J7 PRIME(2016) folder ( you will need to extract the rar file) you just downloaded and run 1-EnterDownloadMode.bat
STEP 3 : Wait for the phone to reboot into Download Mode ( If nothing happens after running 1-EnterDownloadMode.bat then you might need to disconnect and reconnect your USB cable and Allow USB Debugging (Check Always allow from this computer) when it prompts you. With this done, your device should automatically reboot into Downloading Mode.
STEP 4 : In Downloading Mode Run Odinv3.10.7.exe (Found in ROOT J7 PRIME(2016) folder) and click on AP and open
SM-G610_cwm.tar from ROOT J7 PRIME(2016) folder
After this go to Options in Odinv3.10.7.exe and uncheck both Auto Reboot & F Reset Time and finally click on start to execute the installation of CWM recovery. Wait for it to finish (When it says 'PASS!') and after that press and hold the Volume Down, Power and Home Button together ( To get out of download Mode ) and when you see the phone gets rebooted press and hold Volume Up, Power button and Home button to boot into CWM Recovery
STEP 5 : Enjoy! You now have CWM recovery installed
Second Part: Installing SuperSU
MUST READ
Use Volume buttons and power button in CWM Recovery to navigate through and select the different options.
How to Root
STEP 1 : In CWM Recovery, go to install zip package and then select install zip from sideload.
At this point you will have to connect your device to your computer and once done run ROOT.bat from ROOT J7 PRIME(2016) folder and wait for it to finish.
STEP 2 : Now run 3-Reboot.bat from ROOT J7 PRIME(2016) folder and you should see your phone get rebooted.
STEP 3 : Enjoy! You have just rooted your phone!
tapus mo mg root open mo z3x mo click mo G610M
wag muna read code kc d yan gagana direct unlock mu nlang
hintay matapus at mag restart yung unit din ok na na unit done na...
ito na poh yung unit:
thanks!!!
Z3X pro
usb data cable
1st need muna root yung unit
dl muna ito
ito procedure pag root
Step by Step Instructions
STEP 1 : Connect your phone to your computer & Allow access to your device when the MTP Connection box pops up
STEP 2 : Now go to the ROOT J7 PRIME(2016) folder ( you will need to extract the rar file) you just downloaded and run 1-EnterDownloadMode.bat
STEP 3 : Wait for the phone to reboot into Download Mode ( If nothing happens after running 1-EnterDownloadMode.bat then you might need to disconnect and reconnect your USB cable and Allow USB Debugging (Check Always allow from this computer) when it prompts you. With this done, your device should automatically reboot into Downloading Mode.
STEP 4 : In Downloading Mode Run Odinv3.10.7.exe (Found in ROOT J7 PRIME(2016) folder) and click on AP and open
SM-G610_cwm.tar from ROOT J7 PRIME(2016) folder
After this go to Options in Odinv3.10.7.exe and uncheck both Auto Reboot & F Reset Time and finally click on start to execute the installation of CWM recovery. Wait for it to finish (When it says 'PASS!') and after that press and hold the Volume Down, Power and Home Button together ( To get out of download Mode ) and when you see the phone gets rebooted press and hold Volume Up, Power button and Home button to boot into CWM Recovery
STEP 5 : Enjoy! You now have CWM recovery installed
Second Part: Installing SuperSU
MUST READ
Use Volume buttons and power button in CWM Recovery to navigate through and select the different options.
How to Root
STEP 1 : In CWM Recovery, go to install zip package and then select install zip from sideload.
At this point you will have to connect your device to your computer and once done run ROOT.bat from ROOT J7 PRIME(2016) folder and wait for it to finish.
STEP 2 : Now run 3-Reboot.bat from ROOT J7 PRIME(2016) folder and you should see your phone get rebooted.
STEP 3 : Enjoy! You have just rooted your phone!
tapus mo mg root open mo z3x mo click mo G610M
wag muna read code kc d yan gagana direct unlock mu nlang
hintay matapus at mag restart yung unit din ok na na unit done na...
ito na poh yung unit:
thanks!!!
