Share ko lng ulit mga bossing buena mano ko sa umagang ito.
Unit: Samsung
Model: J701F/DS
Problem: Binary Block
Tools: Z3x
Firmware: BINARY 3
Ito po yung status ng phone ni tomer ng dinala sakin
and after 10 sec nag rerestart na.
Try ko hardreset kaso hindi mka pasok sa recovery
Kaya ginawa ko is download ako ng firmware which is Binary 3
Open po natin si Z3x Tapos select ang tamang model..
Insert po natin yung file
(In my case hindi kuna sinama si BL) si PDA,CP, At CSC lang.
LOGS:
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-J701F
Software version: 35.2
File analysis... OK
Total file size: 0xE5F325C5 (3679 Mb)
Searching USB Flash interface... COM20 detected
Setup connection... OK
Reading PIT from phone... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending userdata.img... OK
Sending modem.bin... OK
Sending cache.img... OK
Sending hidden.img... OK
Flashing done (time - 00:03:20)
Done with Samsung Tool PRO v.35.2
After Flashing ok na po yan mga bossing..
Finish Product
Unit: Samsung
Model: J701F/DS
Problem: Binary Block
Tools: Z3x
Firmware: BINARY 3
Ito po yung status ng phone ni tomer ng dinala sakin
and after 10 sec nag rerestart na.
Try ko hardreset kaso hindi mka pasok sa recovery
Kaya ginawa ko is download ako ng firmware which is Binary 3
Open po natin si Z3x Tapos select ang tamang model..
Insert po natin yung file
(In my case hindi kuna sinama si BL) si PDA,CP, At CSC lang.
LOGS:
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-J701F
Software version: 35.2
File analysis... OK
Total file size: 0xE5F325C5 (3679 Mb)
Searching USB Flash interface... COM20 detected
Setup connection... OK
Reading PIT from phone... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Sending userdata.img... OK
Sending modem.bin... OK
Sending cache.img... OK
Sending hidden.img... OK
Flashing done (time - 00:03:20)
Done with Samsung Tool PRO v.35.2
After Flashing ok na po yan mga bossing..
Finish Product