SAMSUNG J8 7 HANG LOGO DONE SA CM2MTK
post ko lang mga boss tangap ko kanina hang logo lang try ko sana mag download kaya lang mahina net di kaya na isip ko try ko format sa cm2 ayun di namn ako na bego ito ohh....
LOG:
BACK UP LOG:
back up uploading mga boss
for reference lang sana ma ka tolong
post ko lang mga boss tangap ko kanina hang logo lang try ko sana mag download kaya lang mahina net di kaya na isip ko try ko format sa cm2 ayun di namn ako na bego ito ohh....
LOG:
Code:
Card found : S/N : 6CB042B6 , v0136
Chinese Miracle II [MTK module] v 1.58
Operation : Format FileSystem [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 29 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6571
BB_CPU_NME : [MediaTek] MT6571_S00
BB_CPU_EXT : 0xCA00 , 0x8D00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8B
NAND Flash : 00EC00BC00000055005400EC00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x008D , [SAMSUNG] KA100O015E_BJTT/KF94G16Q4V
[NAND] : FLASH_DIE : 00EC 00BC 0000 0055 0054 00EC 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
DEV RID : 0x14E676A42FF143832102588DBE0CBC8F
INT RAM : 0x00020000
EXT RAM : 0x10000000 [256 MiB]
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Clear USERDATA
Clear Ok!
Clear CACHE
Clear Ok!
Done!
Elapsed: 00:00:28
Reconnect Power/Cable!BACK UP LOG:
Code:
Operation : Read Flash [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 29 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6571
BB_CPU_NME : [MediaTek] MT6571_S00
BB_CPU_EXT : 0xCA00 , 0x8D00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8B
NAND Flash : 00EC00BC00000055005400EC00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x008D , [SAMSUNG] KA100O015E_BJTT/KF94G16Q4V
[NAND] : FLASH_DIE : 00EC 00BC 0000 0055 0054 00EC 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
DEV RID : 0x14E676A42FF143832102588DBE0CBC8F
INT RAM : 0x00020000
EXT RAM : 0x10000000 [256 MiB]
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
[Read Ok] : preloader_s9_71_nand_fwvga_jyk_pb108_rj045_2_j87_
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img
[ScatCFG] : MT6571 / V1.1.1 / s9_71_nand_fwvga_jyk_pb108_rj045_2_ / NAND
FW Size : 253 MiB
Brand : Android
ProdName : J87
ProdModel : J87
AndroidVer: 4.4.2
MTKxCPU : MT6571
MTKxPRJ : MP.V1.0
Android Info saved
Scatter saved to : C:\Users\julay20\Desktop\New folder (5)\MT6571_NAND_Android__J87___4.4.2__MP.V1.0
Done!
Elapsed: 00:04:02
Reconnect Power/Cable!back up uploading mga boss
for reference lang sana ma ka tolong
