Samsung M130K Galaxy K TMPA Done [ANYCALL]

[chanay]

Model: GT-M130K [korea]
Problem: Too Many Password Attemp
Solution: Flash via Odin

SOFTWARE REQUIREMENTS

1. Samsung Kies (latest version - download it from Samsung's Site)
2. Odin3 v3.04 (flashing software)
3. ROM (M130K_VF23_froer.MoD_v3.3_rooted)
4. Kernel (Tegrak-Kernel-Build-25-for-M130K-VF23)

FLASHING THE ROM

1. Install Samsung Kies - the purpose of this is just for the pc to be installed with the needed drivers for it to detect your smartphone - you will not use this in the actual flashing of the rom
2. Download Odin, ROM and Kernel
3. Backup all the files, contact etc to your computer (its up to you)
4. Turn off your Galaxy K
5. Press Home and hold the Power key to access download mode (shows a yellow triangle and android logo in the screen)
6. Open ODIN and connect your Galaxy K to PC (wait for the Yellow Mark "Ex. [COM:34]" to appear)
7. Tick the box beside PDA Button and click the PDA button
8. Locate the M130K_VF23_froer.MoD_v3.3_rooted.tar (it should be on a .tar form - unrar first if it's in .rar form)
9. Click the Start Button and wait until the message on the box says "Pass"
10. Your Device will reboot (it will take a little sometime for this so please wait)
12. Unplug the Device and wait til the phone opens (default in Korean Language so change it to English by going to settings - make sure you have memorize the location of this in the settings first especially if you don't know korean - take note of the icon)
13. Done Flashing the firmware VF23 ROOTED by FROER

FLASHING THE TEGRAK KERNEL

1. Turn off your Galaxy K
2. Press Home and hold the Power key to access download mode again (yellow triangle with Android logo)
3 Run ODIN again and Connect your device to usb until it will be detected and COM something appears
4. Tick again the box beside PDA Button and click the PDA button also
5. Locate the Tegrak-Kernel-Build-25-for-M130K-VF23.tar
6. Click the Start Button and wait until the message on the box says "Pass"
7. The device will again reboot

Note: After flashing the tegrak kernel you will notice that whenever you restart your device there is this somewhat a startup script running - that is just ok and normal, don't worry.

FOR LAGFIXING

1. Download and install TEGRAK KERNEL App from Google Play (Android Market)
2. Run "TEGRAK KERNEL App" and "Enable tegrak lagfix (all)"
3 Your Device will reboot again (it will run a script on startup. when you see failed to lstat /system/app/VisualizationWallpapers.apk. err=2 (No such file or directory) just press the Home button and it will continue. What it does is it actually converts your phone's partition from rfs (old format) to ext4 (latest and fast - minimize lags). When its done it will say press any key... Just press Home button and it will reboot


Result

ODIN3 v3.04


VF23 ROM

source here​

 

[derick21]

thanks for sharing boss malaking bagay ito sa tahanan./.keep sharing..

 

[chanay]

thanks for sharing boss malaking bagay ito sa tahanan./.keep sharing..

welcome...last week ko pa dapat yan ipopost kaso busy ehehe...

 

[revengzpro]

Good job..sir

 

[rexelens]

yown dali din...