Samsung Note 8(Clone)M-horse TOP-Note8 firwmare Tried and tested!!!

[dudeskie27]

100% working https://mega.nz/#!Iu5w3ToD!FMxjWfI1SnOnWHDwCqILc_UA1OL3EBL5KeMbwlRwtVk


Operation : Flash [ v1.27 ]

======= Flash
Files set for flashing :
[ MCU ] : JHM-Top_Note8-2017.09.28-V02-(Duble)CARD.pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx_S12_S52_324
PacVersion : JHM-Top_Note8-2017.09.28-V02-(Duble)CARD
File : fdl1.bin
File : fdl2.bin
File : nvitem.bin
File : nvitem_wcn.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : SC7702_sc7731g_band128.bin
File : DSP_DM_G2.bin
File : SC8800G_x30g_wcn_dts_modem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : logo.bmp
File : logo2.bmp
File : logo3.bmp
File : logo4.bmp
File : logo5.bmp
File : logo6.bmp
File : logo7.bmp
File : cache.img
File : u-boot.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 6 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x1D records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : CODE
Current ID : PRODNV
Current File : prodnv.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : MODEM_W
Current File : SC7702_sc7731g_band128.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : DSP_W
Current File : DSP_DM_G2.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : MODEM_WCN
Current File : SC8800G_x30g_wcn_dts_modem.bin
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : BOOT
Current File : boot.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : RECOVERY
Current File : recovery.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : BOOTLOGO
Current File : logo.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : LOGO2
Current File : logo2.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : LOGO3
Current File : logo3.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : LOGO4
Current File : logo4.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : LOGO5
Current File : logo5.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : LOGO6
Current File : logo6.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : CODE
Current ID : LOGO7
Current File : logo7.bmp
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ...
[FlashProc] : Ok!

[FlashProc] : ERASE
Current ID : ERASEMISC
Current Part : misc
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID : UBOOTLOADER
Current File : u-boot.bin
Flashing now ...
[FlashProc] : Ok!


Elapsed: 00:02:09

Reconnect Power/Cable!



salamat sa firwmare