Samsung S3 (SC-06D & SC-03E) Unlock done, No root, Just tricks and Z3x

[Ferdielux]

God Day mga Antech,

Share kulang tong gawa ko kahapon..
Midjo nahirapan kasi ako sa pag Unlock nito dahil my mga trick pah
kasi before mo maproceed sa Z3x Unlocking..

ibaiba po process nila, unahin ko po ang SC-03E.
ito po procedure.

PROCEDURE

SELECT MODEL SC-03E

To connect SC-01E phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to Calculator application.
6. Enter "(+30012012732+" number, to get phone dial window.
7. Enter "*#1575#" or "*#0808#" .
8. On phone keybord press "Menu" button, and select "Back".
9. Set "Diag config" to "USB" value.
10. Go to dial window.
11. Enter "*#7284#" or "*#9090#" .
12. Set "USB" radio button to "Modem" value.
13. Go to "Qualcomm USB Settings".
14. Select "DM+MODEM+ADB".
15. Close window.
16. Press" DIRECT UNLOCK".

Ito po SS ng Z3x.

Sa SC-06D naman po,
Ganito yun..

PROCEDURE:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "DM + Modem + ADB".
10. Close window.
11. Go to dial window.
12. Enter "*#9090#" number.
13. Set "Diag config" to "UART" value.
14. Restart phone.
15. Press Direct unlock..

Ito po SS ng Z3x.

​

pasinsya walang SS nang unit after maUnlock.. Nagmadali kasi c tumer.

Salamat po sa pagsilip.. paThanks nalang mga boss kung nakatulong o nagustohan nyu..





rgrdz,
Ferdz

 

[TOTO27]

thanks sa reference bos Ferdielux..

 

[verser09]

PROCEDURE:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial window.
6. Enter "*#7284#" number.
7. Set "UART" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "DM + Modem + ADB".
10. Close window.
11. Go to dial window.
12. Enter "*#9090#" number.
13. Set "Diag config" to "UART" value.
14. Restart phone.
15. Press Direct unlock..

NOT work for me yung

7. Set "UART" radio button to "MODEM" value.

PDA yan ang gumana

UNLOCK INSTRUCTIONS:
Micro-USB cable:
1. Phone must be powered on.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Type *#9090# and choose USB (or 'DM/DUN over HSIC').
4. Reboot phone.
Or use 'Activate Diag' function from 'Repair' tab.
5. Connect USB cable, install drivers if needed.
6. Select Samsung diagnostic port in port settings.
7. Press 'Unlock' button for direct unlock.

Operation: Unlock
Selected model: SC-06D
Selected port: COM129 SAMSUNG Mobile USB Serial Port
Software version: 30.4

Reading phone info...
Reading IMEI... OK
IMEI: 3526700539*****
Unlocking... OK
Reseting... OK
Unlock done

Done with Samsung Tool PRO v.30.4