SAMSUNG S3850 (CORBY II)
REMARKS
* Hindi makatawag, Hindi matawagan
* Hindi makapag text, Hindi makatanggap ng text
* Nag hahang
* Namamatay na kusa
REASON :
* CORRUPTED ANG IMEI
TOOLS WE NEEDED :
* Z3X BOX
* MULTILOADER V.5.65
* XEKC5 W/ BOOT FILES (i download mula sa support para sure na good yung firmware)
####
Teka pati una ko lang sa mga makaka encounter nito huwag na kayong mag tangkang
mag short cut w/ your preferred firmware magpapagod ka lang tulad ko, need talaga nating
dumaan sa tamang proseso, 3 times kong sinubukan pero failed lang sa huli palagi.. like this.
PROCEDURE :
* Prepair your firmware (XEKC5 W/BOOT FILES) and locate sa madaling hanapin
* Open Multiloader V.5.65
* ON GUI (dashboard)
1] Enabled (BRCM2133)
2] Check (FULL DOWNLOAD)
3] Complete the files needed from "BOOT - SHP APP" (RSRC2 LOW ANG PILIIN)
4] On your MOBILE reset the battery and put into a download mode
(VOLUME UP + CALL + POWER ON) and wait to recognize on system
5] Click (DOWNLOAD) and wait to finish
### REBUILD IMEI ###
* Open Z3X on 2G TOOL section
1] Select the correct model
2] Check & Fill up the IMEI & SERIAL NUMBER box (much better yung dati ang gamitin)
3] Fill up the files needed from (APPS - APP_B) same files na ginamit sa (MULTILOADER)
4] Click (CUSTOM) and wait to finish..
And Congratulations your Done..
REMARKS
* Hindi makatawag, Hindi matawagan
* Hindi makapag text, Hindi makatanggap ng text
* Nag hahang
* Namamatay na kusa
REASON :
* CORRUPTED ANG IMEI
TOOLS WE NEEDED :
* Z3X BOX
* MULTILOADER V.5.65
* XEKC5 W/ BOOT FILES (i download mula sa support para sure na good yung firmware)
####
Teka pati una ko lang sa mga makaka encounter nito huwag na kayong mag tangkang
mag short cut w/ your preferred firmware magpapagod ka lang tulad ko, need talaga nating
dumaan sa tamang proseso, 3 times kong sinubukan pero failed lang sa huli palagi.. like this.
PROCEDURE :
* Prepair your firmware (XEKC5 W/BOOT FILES) and locate sa madaling hanapin
* Open Multiloader V.5.65
* ON GUI (dashboard)
1] Enabled (BRCM2133)
2] Check (FULL DOWNLOAD)
3] Complete the files needed from "BOOT - SHP APP" (RSRC2 LOW ANG PILIIN)
4] On your MOBILE reset the battery and put into a download mode
(VOLUME UP + CALL + POWER ON) and wait to recognize on system
5] Click (DOWNLOAD) and wait to finish
### REBUILD IMEI ###
* Open Z3X on 2G TOOL section
1] Select the correct model
2] Check & Fill up the IMEI & SERIAL NUMBER box (much better yung dati ang gamitin)
3] Fill up the files needed from (APPS - APP_B) same files na ginamit sa (MULTILOADER)
4] Click (CUSTOM) and wait to finish..
And Congratulations your Done..