Samsung shw-m190s unlocked! [Reference]
share ko lang mga master Samsung SHW-M190S
Lock sa other Network
Using Octopus Box Activated
Select SHW-M110S
Read Info
Read Codes
sundan lang yung procedure to unlock
Thanks!!!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM37
Selected model: SHW-M190S
Detected phone model: SHW-M190S
HW Version: SKT
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM37
Selected model: SHW-M190S
Port is busy
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM39
Mode: Normal
Phone model: SHW-M110S
Firmware compiled date: Sep 28 2010
Firmware compiled time: 13:00:00
Firmware released date: Jan 18 2012
Firmware released time: 10:50:02
Phone IMEI: 355316-04-120672-4
Bluetooth MAC: 8C:71:F8:68:B1:28
WiFi MAC: 8C:71:F8:68:B1:29
SW Version: SBAM6290A-KPRZL-2.4.012503_8S
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM39
Selected model: SHW-M110S
Mode: Normal
Phone model: SHW-M110S
Firmware compiled date: Sep 28 2010
Firmware compiled time: 13:00:00
Firmware released date: Jan 18 2012
Firmware released time: 10:50:02
Phone IMEI: 355316-04-120672-4
Bluetooth MAC: 8C:71:F8:68:B1:28
WiFi MAC: 8C:71:F8:68:B1:29
SW Version: SBAM6290A-KPRZL-2.4.012503_8S
Reading phone unlock codes. It can take some time, please wait...
-----------------------------------------------------------------------------------
Phone unlock code: 72192611
To finish the operation you have to perform the following steps:
1. Go to dial window.
2. Enter "319712358" number.
3. Enter "774632" password.
4. Select "USIM Settings" menu item.
5. Select "Network personalizaion" menu item.
6. Enter phone unlock code.
7. "Success" sighn must appear.
8. Restart phone.
Provide following steps:
Go to dial window;
Enter "*#7284#" number;
Set "USB" radio button to "Modem" value;
Close window;
Go to dial window;
Enter "*#9090#" number;
Set "Diag config" to "USB" value;
Restart phone;
Lock sa other Network
Using Octopus Box Activated
Select SHW-M110S
Read Info
Read Codes
sundan lang yung procedure to unlock
Thanks!!!
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM37
Selected model: SHW-M190S
Detected phone model: SHW-M190S
HW Version: SKT
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM37
Selected model: SHW-M190S
Port is busy
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM39
Mode: Normal
Phone model: SHW-M110S
Firmware compiled date: Sep 28 2010
Firmware compiled time: 13:00:00
Firmware released date: Jan 18 2012
Firmware released time: 10:50:02
Phone IMEI: 355316-04-120672-4
Bluetooth MAC: 8C:71:F8:68:B1:28
WiFi MAC: 8C:71:F8:68:B1:29
SW Version: SBAM6290A-KPRZL-2.4.012503_8S
-----------------------------------------------------------------------------------
Platform: Samsung Anycall
Selected port: COM39
Selected model: SHW-M110S
Mode: Normal
Phone model: SHW-M110S
Firmware compiled date: Sep 28 2010
Firmware compiled time: 13:00:00
Firmware released date: Jan 18 2012
Firmware released time: 10:50:02
Phone IMEI: 355316-04-120672-4
Bluetooth MAC: 8C:71:F8:68:B1:28
WiFi MAC: 8C:71:F8:68:B1:29
SW Version: SBAM6290A-KPRZL-2.4.012503_8S
Reading phone unlock codes. It can take some time, please wait...
-----------------------------------------------------------------------------------
Phone unlock code: 72192611
To finish the operation you have to perform the following steps:
1. Go to dial window.
2. Enter "319712358" number.
3. Enter "774632" password.
4. Select "USIM Settings" menu item.
5. Select "Network personalizaion" menu item.
6. Enter phone unlock code.
7. "Success" sighn must appear.
8. Restart phone.
Provide following steps:
Go to dial window;
Enter "*#7284#" number;
Set "USB" radio button to "Modem" value;
Close window;
Go to dial window;
Enter "*#9090#" number;
Set "Diag config" to "USB" value;
Restart phone;