DOWNLOAD Samsung sm-g530f firmware

[BEARD]

Samsung sm-g530f firmware

FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on phone in download mode (turn off phone, press vol.down + home + power).
5. Connect phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.

Operation: Flash
Selected model: SM-G530F
Software version: 27.7

File analysis... Ok
Total file size: 0x45014898 (1104 Mb)
Searching USB Flash interface... COM21 detected
Setup connection... Ok
Reading PIT from phone... Ok
Sending aboot.mbn... Ok
Sending sbl1.mbn... Ok
Sending rpm.mbn... Ok
Sending tz.mbn... Ok
Sending hyp.mbn... Ok
Sending NON-HLOS.bin... Ok
Sending sec.dat... Ok
Sending boot.img... Ok
Sending recovery.img... Ok
Sending system.img.ext4... Ok
Sending modem.bin... Ok
Sending cache.img.ext4... Ok
Sending hidden.img.ext4... Ok
Flashing done (time - 00:02:03)

Done with Samsung Tool PRO v.27.7

download 1 file firmware version G530HDXU2AOC2_OLB2AOC1_Southeast_Asia_4.4.4

G530HDXU2AOC2_G530HOLB2AOC1_G530HXXU2AOA1_HOME.tar.md5

100% tested by Md Firoz Ahmed

Download​