Share ko lang itong tanggap ko ngayung umaga... 
http://imgur.com/a/k2Qoa
Model : Samsung SM-J100H
Problem : Hang sa Logo
Solution : Flashing with Z3X box pro...
Steps:
1. Open Z3X shell tapos download ang file...
http://imgur.com/a/x5Jyl
2. Open Z3X samsung tool pro v27.7 tapos ilagay ang firmware na nadownload sa z3x shell
sa PDA .
3. Para ma detect ang phone need mo pumunta sa download mode by pressing Vol down + Home + Power
then press Up volume then ready to flash na kailangan naka install ang driver na phone then HIT FLASH..
3. Wait.......................... until it finish flashing 8-}
http://imgur.com/a/rEy4V
4. Done..........
Done with Samsung Tool PRO v.27.7
Logs:
http://imgur.com/a/YEjn8
http://imgur.com/a/ywLQN
NOTE: Yung firmware na ginamit ko ay nasa Z3X SHELL tested po yan....... :-SS
goodluck......
(l:0
http://imgur.com/a/k2Qoa
Model : Samsung SM-J100H
Problem : Hang sa Logo
Solution : Flashing with Z3X box pro...
Steps:
1. Open Z3X shell tapos download ang file...
http://imgur.com/a/x5Jyl
2. Open Z3X samsung tool pro v27.7 tapos ilagay ang firmware na nadownload sa z3x shell
sa PDA .
3. Para ma detect ang phone need mo pumunta sa download mode by pressing Vol down + Home + Power
then press Up volume then ready to flash na kailangan naka install ang driver na phone then HIT FLASH..
3. Wait.......................... until it finish flashing 8-}
http://imgur.com/a/rEy4V
4. Done..........
Done with Samsung Tool PRO v.27.7
Logs:
Code:
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on phone in download mode (turn off phone, press vol.down + home + power).
5. Connect phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-J100H
Software version: 27.7
File analysis... Ok
Total file size: 0x3BE326D4 (958 Mb)
Searching USB Flash interface... COM12 detected
Setup connection... Ok
Reading PIT from phone... Ok
Sending boot.img... Ok
Sending recovery.img... Ok
Sending system.img... Ok
Sending cache.img... Ok
Sending hidden.img... Ok
Sending SPRDCP.img... Ok
Sending SPRDDSP.img... Ok
Sending nvitem.bin... Ok
Flashing done (time - 00:01:53)
Done with Samsung Tool PRO v.27.7http://imgur.com/a/YEjn8
http://imgur.com/a/ywLQN
NOTE: Yung firmware na ginamit ko ay nasa Z3X SHELL tested po yan....... :-SS
goodluck......
(l:0
