Samsung sm-j100ml/ds hang logo solved by odin via tested firmware

[ernie78]

<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin engine v(ID:3.1101)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Set PIT file..
<ID:0/022> DO NOT TURN OFF TARGET!!
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> SingleDownload.
<ID:0/022> spl.img
<ID:0/022> NAND Write Start!! 
<ID:0/022> sboot.bin
<ID:0/022> sboot2.bin
<ID:0/022> param.lfs
<ID:0/022> boot.img
<ID:0/022> recovery.img
<ID:0/022> system.img
<ID:0/022> SPRDCP.img
<ID:0/022> Transmission Complete.. 
<ID:0/022> Now Writing.. Please wait about 2 minutes
<ID:0/022> Receive Response from boot-loader
<ID:0/022> SPRDDSP.img
<ID:0/022> Transmission Complete.. 
<ID:0/022> Now Writing.. Please wait about 2 minutes
<ID:0/022> Receive Response from boot-loader
<ID:0/022> nvitem.bin
<ID:0/022> Transmission Complete.. 
<ID:0/022> Now Writing.. Please wait about 2 minutes
<ID:0/022> Receive Response from boot-loader
<ID:0/022> cache.img
<ID:0/022> hidden.img
<ID:0/022> RQT_CLOSE !!
<ID:0/022> RES OK !!
<ID:0/022> Removed!!
<ID:0/022> Remain Port ....  0 
<OSM> All threads completed. (succeed 1 / failed 0)