Updated my Samsung Galaxy Tab (GT-P1000) to Storm CyanogenMod 11 with Android 4.4.4 (Kitkat) from stock firmware of Android 2.3.3 (Gingerbread)
2.2 grabe sobrang baba ng version nya froyo lang.
kaya eto gawin natin:
Step 1: Unzip GB-Stock-Safe-v5.zip in your PC. http://d-h.st/oDP
tapos sundan nyo lang po to.
Step 2: Power off your tab. Then hold down its Volumn Down button, at the same time, long press the Power button. Your tab will go into Download mode with screen looks like below:
Step 3: Execute Odin3 v1.7.exe inside the Odin3_v1.7 folder.
Step 4: Connect your tab to your computer using its USB cable. You should see the first box in Odin's ID:COM section turns yellow.
Step 5: Click the PIT button and select the file gt-p1000_mr.pit.
Step 6: Click the PDA button and select the file GB_Stock_Safe_v5.tar.
Step 7: Click the PHONE button. If your tab is GSM-based (Asia/Europe/Middle East/Oceania/Africa/Rest of the world...), select modem.bin inside the folder JPZ Modem. If you are an American T-Mobile user, select modem.bin inside the folder T-Mobile Modem. If you are AT&T (USA), TelCel (Mexico) or Telstra (Australia) user, select modem.bin inside JK3 Modem instead.
Step 8: Click the Start button. The flashing process will begin. Let it run until you see a green PASS! box. Do not power off your PC or your tab, or disconnect the USB cable before you see the green PASS!.
In any event you bricked your tab, you can come here and perform Step 2 to Step 8 above to bring your tab to live again.
Step 9: Your tab should reboot. If not, reboot it. The Android initial setup screen will appear, don't bother to fill in any information, just tap on Next or Skip until you reach the home screen.
Step 10: Turn off your tab. Disconnect its USB cable from PC, and put it into Download mode again (Volumn Down + Power).
Step 11: Unzip Samsung_GT-P1000_CyanogenMod_install_all_in_one.zip in your PC. http://depositfiles.com/files/zn28wrmus
Step 12: Now you can execute the newer Odin3 v1.85.exe inside the Samsung Odin3 v1.85 folder.
Step 13: Connect your tab to your computer using its USB cable.
Step 14: Click the PDA button and select the file CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar inside ClockworkMod Recovery folder.
Step 15: Click the Start button to flash ClockworkMod Recovery into your tab.
Step 15: Click the Start button to flash ClockworkMod Recovery into your tab.
Step 16: Power off your tab. Now you can plug back the external SD card to the tab if you want.
Step 17: Reboot your tab until you get back the Android home screen.
ayun gingerbread na.
DOWNLOAD:http://d-h.st/Cfv
Step 18: Set your tab USB connection to Mass Storage Mode.
Step 19: Transfer the file cm-9.1.0-p1.zip inside CyanogenMod v9.1 for Galaxy Tab GT-P1000 folder to the tab's SD card (internal/external).
Step 20: Turn off your tab. Go into Recovery mode by holding Volumn Up button and at the same time long press the Power button.
Step 21: From the Recovery menu, select Install ZIP then Choose ZIP from SD Card. Locate and select the cm-9.1.0-p1.zip file, then confirm the selection. CM 9.1 will be flashed into your tab and replace the stock firmware. Wait for the process to finish. If there is any error, repeat this step again to reflash CM 9.1.
Step 22: Reboot your tab. The Android initial setup screen will appear, don't bother to fill in any information, just tap on Next or Skip until you reach the home screen.
icream ******** na
DL:
Step 23: Repeat Step 18 until Step 21 for CM 10.2. The file to flash this round is cm-10.2-20131104-UNOFFICIAL-p1.zip. Note that updating from CM 9.1 to CM 10.2 might not be so smooth and might need to repeat Step 21 a few times before a final success.
Step 24: Reboot your tab. The Android initial setup screen will appear. This time, you can fill in your information, and connect to your local WiFi, until you reach the home screen.
jelly bean na.
DL:https://yadi.sk/d/9BtEMNkbD8u63
https://www.androidfilehost.com/?fid=95916177934548318
Step 25: Repeat Step 18 until Step 21 again for CM 11. The file to flash this round is cm-11-20150428-UNOFFICIAL-p1.zip.
Step 26: Finally, flash the minimal Google apps. Repeat Step 18 until Step 21 again. The file to flash this round is pa-gapps-modular-pico-4.4.4-20150308-signed.zip.
Step 27: Reboot your tab. You will find the Google Play Store appears in your home screen.
Step 28: The keyboard that comes with CyanogenMod might be too basic and primitive. I replaced it with iFlytek Voice Input for Pad which you can install from Google Play Store.
success.....kitkat
Now, you can enjoy your GT-P1000 tab with new generation of Android and the CyanogenMod experience.
2.2 grabe sobrang baba ng version nya froyo lang.
kaya eto gawin natin:
Step 1: Unzip GB-Stock-Safe-v5.zip in your PC. http://d-h.st/oDP
tapos sundan nyo lang po to.
Step 2: Power off your tab. Then hold down its Volumn Down button, at the same time, long press the Power button. Your tab will go into Download mode with screen looks like below:
Step 3: Execute Odin3 v1.7.exe inside the Odin3_v1.7 folder.
Step 4: Connect your tab to your computer using its USB cable. You should see the first box in Odin's ID:COM section turns yellow.
Step 5: Click the PIT button and select the file gt-p1000_mr.pit.
Step 6: Click the PDA button and select the file GB_Stock_Safe_v5.tar.
Step 7: Click the PHONE button. If your tab is GSM-based (Asia/Europe/Middle East/Oceania/Africa/Rest of the world...), select modem.bin inside the folder JPZ Modem. If you are an American T-Mobile user, select modem.bin inside the folder T-Mobile Modem. If you are AT&T (USA), TelCel (Mexico) or Telstra (Australia) user, select modem.bin inside JK3 Modem instead.
Step 8: Click the Start button. The flashing process will begin. Let it run until you see a green PASS! box. Do not power off your PC or your tab, or disconnect the USB cable before you see the green PASS!.
In any event you bricked your tab, you can come here and perform Step 2 to Step 8 above to bring your tab to live again.
Step 9: Your tab should reboot. If not, reboot it. The Android initial setup screen will appear, don't bother to fill in any information, just tap on Next or Skip until you reach the home screen.
Step 10: Turn off your tab. Disconnect its USB cable from PC, and put it into Download mode again (Volumn Down + Power).
Step 11: Unzip Samsung_GT-P1000_CyanogenMod_install_all_in_one.zip in your PC. http://depositfiles.com/files/zn28wrmus
Step 12: Now you can execute the newer Odin3 v1.85.exe inside the Samsung Odin3 v1.85 folder.
Step 13: Connect your tab to your computer using its USB cable.
Step 14: Click the PDA button and select the file CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.tar inside ClockworkMod Recovery folder.
Step 15: Click the Start button to flash ClockworkMod Recovery into your tab.
Step 15: Click the Start button to flash ClockworkMod Recovery into your tab.
Step 16: Power off your tab. Now you can plug back the external SD card to the tab if you want.
Step 17: Reboot your tab until you get back the Android home screen.
ayun gingerbread na.
DOWNLOAD:http://d-h.st/Cfv
Step 18: Set your tab USB connection to Mass Storage Mode.
Step 19: Transfer the file cm-9.1.0-p1.zip inside CyanogenMod v9.1 for Galaxy Tab GT-P1000 folder to the tab's SD card (internal/external).
Step 20: Turn off your tab. Go into Recovery mode by holding Volumn Up button and at the same time long press the Power button.
Step 21: From the Recovery menu, select Install ZIP then Choose ZIP from SD Card. Locate and select the cm-9.1.0-p1.zip file, then confirm the selection. CM 9.1 will be flashed into your tab and replace the stock firmware. Wait for the process to finish. If there is any error, repeat this step again to reflash CM 9.1.
Step 22: Reboot your tab. The Android initial setup screen will appear, don't bother to fill in any information, just tap on Next or Skip until you reach the home screen.
icream ******** na
DL:
Step 23: Repeat Step 18 until Step 21 for CM 10.2. The file to flash this round is cm-10.2-20131104-UNOFFICIAL-p1.zip. Note that updating from CM 9.1 to CM 10.2 might not be so smooth and might need to repeat Step 21 a few times before a final success.
Step 24: Reboot your tab. The Android initial setup screen will appear. This time, you can fill in your information, and connect to your local WiFi, until you reach the home screen.
jelly bean na.
DL:https://yadi.sk/d/9BtEMNkbD8u63
https://www.androidfilehost.com/?fid=95916177934548318
Step 25: Repeat Step 18 until Step 21 again for CM 11. The file to flash this round is cm-11-20150428-UNOFFICIAL-p1.zip.
Step 26: Finally, flash the minimal Google apps. Repeat Step 18 until Step 21 again. The file to flash this round is pa-gapps-modular-pico-4.4.4-20150308-signed.zip.
Step 27: Reboot your tab. You will find the Google Play Store appears in your home screen.
Step 28: The keyboard that comes with CyanogenMod might be too basic and primitive. I replaced it with iFlytek Voice Input for Pad which you can install from Google Play Store.
success.....kitkat
Now, you can enjoy your GT-P1000 tab with new generation of Android and the CyanogenMod experience.
EDZKIE
thank's for viewing
ANTGSM
ANTGSM
