SE XPERIA x10i-Kernel version not supported Unlock Done!-Via Octoplus Box [REFERENCE]
Tried to direct unlock, no luck here's the logs.
--------------------------------------------------------------------------------
Read Info
Platform: SE Qualcomm
Selected model: X10i
Octopus smart card is present.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and connect
USB cable...OK
Device serial number: CB511H80V6
Device status: ACTIVE
Reading info...Failed!
Could not get model name! Please, reconnect phone.
--------------------------------------------------------------------------------
Unlock:
Platform: SE Qualcomm
Selected model: X10i
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Smart card activations: LG, Samsung, SE Unlimited, Medusa
Authorizing...OKOK
Your balance: 0 credits.
To unlock X10i you need to have 0 credits.
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and connect
USB cable...OK
Device serial number: CB511H80V6
Device status: ACTIVE
Kernel version: 2.6.29-rel
Firmware version: R1FA014
Kernel version not supported yet.
Please, contact to support.
Solution & Logs
Os Win XP Pro sp3
micro usb (5130) Install correct Drivers
Octopus or Octoplus Box (Activated SE Unlimited)
Flash files from support (download)
Battery Must 75% or Full Charge
Make Back-up all contacts/messages/images etc. via Moborobo
First Flash another Firmware from Support use this X10i_2.1.A.0.435_GLOBAL-GGL GENERIC 1232-9897.oct
Open Octopus Suite
Sony Ericsson tab
Select Phone Models
Browse Flash File
Write Firmware
Hold Back Button then Inser Usb Cable then wait.... to finish
Welcome to Octopus Suite version 1.1.8
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: X10i
Opening "X10i_2.1.A.0.435_GLOBAL-GGL GENERIC 1232-9897.oct"...OK
Please, reconnect battery, hold "back" key and connect USB cable...OK
Reading info...
Chipset: S1 QSD8250
IMEI: 359419-03-24xxxxxx
MSN: CB511H80V6
Sending loader...OK
Writing Firmware...
Writing AMSS...OK
Writing AMSS_FS...OK
Writing CACHE...OK
Writing DSP1...OK
Writing FOTA0...OK
Writing FOTA1...OK
Writing KERNEL...OK
Writing SYSTEM...OK
Writing USERDATA...OK
Shutting down...OK
--------------------------------------------------------------------------------
after Flashing turn on phone go to Debugging settings "Enable USB debugging"
Repeat the unlock procedure
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: X10i
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Smart card activations: LG, Samsung, SE Unlimited, Medusa
Authorizing...OKOK
Your balance: 0 credits.
To unlock X10i you need to have 0 credits.
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and connect
USB cable...OK
Device serial number: CB511H80V6
Device status: ACTIVE
Kernel version: 2.6.29
Firmware version: 2.1.A.0.435
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Checking security...OK
Reading SBL...OK
SBL type: Original, version: R8A013
Reading TA...OK
Backup saved to "C:\Program Files\GsmServer\Octopus_Suite\BACKUP\Sony
Ericsson_X10i_16-06-2013_11-49-42.BKP"
Checking TA...OK
IMEI: 359419-03-2xxxxxx
Replacing SBL...OK
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Writing security area...OK
Finalizing...OK
Rebooting device...OK
Phone sucesfully unlocked!
after that nakahinga na ako ng maluwag Unlock na ang x10i
SE E15i Unlock via Octoplus Box Done!
--------------------------------------------------------------------------------
Read Info
Platform: SE Qualcomm
Selected model: X10i
Octopus smart card is present.
Initializing Android Debug Bridge...OK
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and connect
USB cable...OK
Device serial number: CB511H80V6
Device status: ACTIVE
Reading info...Failed!
Could not get model name! Please, reconnect phone.
--------------------------------------------------------------------------------
Unlock:
Platform: SE Qualcomm
Selected model: X10i
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Smart card activations: LG, Samsung, SE Unlimited, Medusa
Authorizing...OKOK
Your balance: 0 credits.
To unlock X10i you need to have 0 credits.
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and connect
USB cable...OK
Device serial number: CB511H80V6
Device status: ACTIVE
Kernel version: 2.6.29-rel
Firmware version: R1FA014
Kernel version not supported yet.
Please, contact to support.
Solution & Logs
Os Win XP Pro sp3
micro usb (5130) Install correct Drivers
Octopus or Octoplus Box (Activated SE Unlimited)
Flash files from support (download)
Battery Must 75% or Full Charge
Make Back-up all contacts/messages/images etc. via Moborobo
First Flash another Firmware from Support use this X10i_2.1.A.0.435_GLOBAL-GGL GENERIC 1232-9897.oct
Open Octopus Suite
Sony Ericsson tab
Select Phone Models
Browse Flash File
Write Firmware
Hold Back Button then Inser Usb Cable then wait.... to finish
Welcome to Octopus Suite version 1.1.8
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: X10i
Opening "X10i_2.1.A.0.435_GLOBAL-GGL GENERIC 1232-9897.oct"...OK
Please, reconnect battery, hold "back" key and connect USB cable...OK
Reading info...
Chipset: S1 QSD8250
IMEI: 359419-03-24xxxxxx
MSN: CB511H80V6
Sending loader...OK
Writing Firmware...
Writing AMSS...OK
Writing AMSS_FS...OK
Writing CACHE...OK
Writing DSP1...OK
Writing FOTA0...OK
Writing FOTA1...OK
Writing KERNEL...OK
Writing SYSTEM...OK
Writing USERDATA...OK
Shutting down...OK
--------------------------------------------------------------------------------
after Flashing turn on phone go to Debugging settings "Enable USB debugging"
Repeat the unlock procedure
--------------------------------------------------------------------------------
Platform: SE Qualcomm
Selected model: X10i
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Smart card activations: LG, Samsung, SE Unlimited, Medusa
Authorizing...OKOK
Your balance: 0 credits.
To unlock X10i you need to have 0 credits.
Disconnect USB cable and power on the phone. Select menu
"Settings"->"Applications"->"Development"->"Enable USB debugging" and connect
USB cable...OK
Device serial number: CB511H80V6
Device status: ACTIVE
Kernel version: 2.6.29
Firmware version: 2.1.A.0.435
Kernel version is supported
Checking root access...
Device is not rooted.
Sending exploit...OK
Executing exploit...OK
Reconnecting device. Please wait...OK
Checking root access...OK
Root access garanted!
Initializing flash...OK
Checking security...OK
Reading SBL...OK
SBL type: Original, version: R8A013
Reading TA...OK
Backup saved to "C:\Program Files\GsmServer\Octopus_Suite\BACKUP\Sony
Ericsson_X10i_16-06-2013_11-49-42.BKP"
Checking TA...OK
IMEI: 359419-03-2xxxxxx
Replacing SBL...OK
Calculating security on the server...
Sending TA to server...OK
Calculating. Please, wait...OK
Receiving TA...OK
Writing security area...OK
Finalizing...OK
Rebooting device...OK
Phone sucesfully unlocked!
after that nakahinga na ako ng maluwag Unlock na ang x10i
SE E15i Unlock via Octoplus Box Done!