SHW-M420 Debrand to I9250 (Galaxy Nexus) Success..[Reference]

SHW-M420 Debrand to I9250 (Galaxy Nexus) Success
Mga dapat ihanda na gagamitin:
Octopus Box
Usb cable
Jtag para kung mag failed at ma deadboot iwas abuno
Paano ba gawin:
Buksan mo ang octopus software
Piliin sa listahan ng unit ay I9250
Ilagay ang flash file
Off mo ang unit
Pindutin ng sabay ang Volume Down at Power
Install amo tamang Driver
Ngayun pindutin mo na ang Write Firmware
Mga dapat ihanda na gagamitin:
Octopus Box
Usb cable
Jtag para kung mag failed at ma deadboot iwas abuno
Paano ba gawin:
Buksan mo ang octopus software
Piliin sa listahan ng unit ay I9250
Ilagay ang flash file
Off mo ang unit
Pindutin ng sabay ang Volume Down at Power
Install amo tamang Driver
Ngayun pindutin mo na ang Write Firmware
Hirap din pala mag tagalog ,kahit hindi sanay sa ENGLISH
Welcome to Octopus Box Samsung software version 1.8.7
Selected firmware file: I9250 LUX I9250XWKK9.oct
Please switch your phone to the download mode and connect it to a PC.
To put GT-I9250 phone into download mode you have to perform the following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Power" buttons.
Found phone on
Firmware write started.
Writing xloader section...
xloader section has been written successfully.
Writing sbl section...
sbl section has been written successfully.
Writing boot section...
boot section has been written successfully.
Writing recovery section...
recovery section has been written successfully.
Writing system section...
system section has been written successfully.
Writing userdata section...
userdata section has been written successfully.
Writing radio section...
radio section has been written successfully.
Firmware writing successfully completed.
Selected firmware file: I9250 LUX I9250XWKK9.oct
Please switch your phone to the download mode and connect it to a PC.
To put GT-I9250 phone into download mode you have to perform the following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Power" buttons.
Found phone on
Firmware write started.
Writing xloader section...
xloader section has been written successfully.
Writing sbl section...
sbl section has been written successfully.
Writing boot section...
boot section has been written successfully.
Writing recovery section...
recovery section has been written successfully.
Writing system section...
system section has been written successfully.
Writing userdata section...
userdata section has been written successfully.
Writing radio section...
radio section has been written successfully.
Firmware writing successfully completed.


