SKK LYNX PRO users

[spinvent]

Hi share ko lng sa mga SKK LYNX PRO users dko lng sure kung gagana sa lahat! Nangyari kasi eh nag factory wipe/reset ako gamit and philz non touch recovery na nilagay ko thru Android system recovery then apply update from zip. Pagtapos nga lng mag reboot hang ako sa logo ng SKK balak ko kasi mag reboot uli thru recovery same process tapos mag try ako ng ROM na balak ko install kaso nga hang on logo na kaya kung ano anong google search na ginawa ko makahanap lng ng stock firmware. Took me 3 days to put a firmware of a different mobile company Hello mobile from myanmar i search it using the build version of SKK LYNX PRO nilagay ko sya and my phone is working again same specs sya so far wla naman ako nakikita pagkakaiba except sa RAM which is naging 512mb nlng ram ng phone. Gusto ko rin sana mag tanong kung kelangan pa ba gamitin ang IMEI tool pra malagay ung talagang IMEI ng phone. I will provide screenshot next time kasi in process pako in rooting the phone, na root ko sya gamit ang ant software pero nawawala rin and sana may mag upload talaga ng firmware ng SKK LYNX PRO pansamantala ko lng naman gagamitin ung firmware na nakuha ko. (l:0

 

[spinvent]

For SKK LYNX PRO USERS, kung na bricked ung phone may firmware kayo magagamit Android 5.1 pa sya rooted using Kingo Root app sa iba nga lng galing ang firmware magiging Hello Mobile P8 ang SKK PRO nyo.

Link for firmware: http://www.ngaluu.com/android-rom/hello-p8-company-firmware-မ်ား.html

Tool for flashing : http://www.mediafire.com/download/b9z947qjzhw7q2a/RESEARCHDOWNLOAD_R4.0.0001.rar

Steps.
1. Download fimrware and flashing tool then run researchdownload.exe from BIN folder use admin rights.
2. Extract firmware from archive then click load packet from research download tool. After loading click the start downloading in research download tool.
3. Turn off phone remove battery 3-5 seconds insert Hold Vol Down only then insert in USB slot. If your PC can't install drivers google for spreadtrum usb drivers if you have installed drivers you should have a SPRD COM PORT in device manager. The COM Port is use for the flashing tool to download the firmware on phone.

-If your PC has spreadtrum drivers already, holding Vol Down before inserting in USB slot research download tool will automatically download firmware in your phone. I did it less than 3 mins and my SKK LYNX PRO is running on Android 5.1 Lollipop smoothly. Hope this helps for those who bricked their LYNX PRO phones.

 

[farleen]

pa up nid badly

link error