REFERENCE sm A03s frp done by cm2 v2. 28

[abdulrahman]

Operation : Reset Settings/Format FS [ v2.28 ]

Mode : SMART RESET EXTRA

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek USB Port (COM8)
MODE : BOOTROM
PORT : 8
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Cervino
TYPE : MODERN [RAPHAEL]
BROM : MEID : 4992EE13B390C8B08032DA93F4B175AC
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 2C50C622E6BFD4A54EA415D29DA5F1894F4BC9DA1467F94265 0ED8D06A883379
BROM : Sending FireFly
FireFly : Starting ...
FireFly : Init Core
FireFly : Core init done!
FireFly : Running : v04.04.04 on MT6765
FireFly : eMMC init passed!

EMMC: CSD : D02701320F5903FFF6DBFFEF8E40400D
EMMC: CSD : TEMP_WRITE_PROTECT: False
EMMC: CSD : PERM_WRITE_PROTECT: False

EMMC: CID : 15010047583642414200B8E668E758BB
EMMC: VEN : SAMSUNG : OEM : 0 : ID : 475836424142
EMMC: VEN : SAMSUNG : GX6BAB
EMMC: SNN : 3102107879 ( 0xB8E668E7) , MF : 5/2021

EMMC: EXTCSD : rev1.8 ( eMMC 5.1 )
EMMC: EXTCSD [BOOT_BUS_WIDTH] : 0x02
EMMC: EXTCSD [PARTITION_CONFIG] : 0x48
EMMC: EXTCSD [SIZE] : Market : 32 GB
EMMC: EXTCSD [SIZE] : Actual : 0x747C00000 [ 29.12 GB ]
EMMC: EXTCSD [EOL] : EOL status : Normal ( Less than 80% reserved blocks used )
EMMC: EXTCSD [EOL_A] : SLC status : 0% - 10% used
EMMC: EXTCSD [EOL_B] : MLC status : 0% - 10% used

EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

DA : USB : HIGH-SPEED

Boot done!

SmartInfo : 0x835757

Format Ok : RESET PROTECTION
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : USERDATA
Format Ok : Vendor Extra

Done!
Elapsed: 00:01:04

Reconnect Power/Cable!
yan sinondan ko para hindi mag kamali tested ko nayan. palike naman jan.

 

[meerlgsm]

wala bang setting procedure boss para madali masundan ng iba

 

[joeytorrevillo]

master pa lagay po ng instruction po salamat

 

[gasmido]

Maraming salamat dito boss. Sa dinami dami ng method na nakita ko. Eto lang yung gumana! kudos!

 

[BlackMamba]

maganda sana paps kung may complete procedure

 

[tsunami]

Sa unlock tool swabe lang din yan