SM-A310F FRP Done ("sBoot" is not supported)

J

jomarduculan

Registered
Joined
Jan 13, 2015
Messages
61
Reaction score
4
Points
1
Location
San Fernando City, La Union
A310F FRP This version of "sBoot" is not supported, try to downgrade "sBoot"!

Tools.
-Octopus/Octoplus Box
-Samsung Micro UART cable(with 525K resistor)
-Micro USB
-sBoot File DL
(Flash Using ODIN/Z3X/Octopus)


Welcome to Octoplus Box Samsung software version 2.6.1
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A310F
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...
This version of "sBoot" is not supported, try to downgrade "sBoot"!
Operation was failed!
Performed by 2.6.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A310F
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM4
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/2 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.1 Software version.
Click to expand...

***Password Protected***
USE TRIANGLE BUTTON OR PM ME FOR THE PASSWORD AND HIT THANKS BUTTON

THANK YOU!
 
Welcome to Octoplus Box Samsung software version 2.6.8
Selected AP file: L:\Samsung Galaxy A3 A310F\New folder (4)\FRP
A310F.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A310F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Writing firmware Canceled
Performed by 2.6.8.2 Software version.
Selected AP file: L:\Samsung Galaxy A3 A310F\New folder (4)\FRP
A310F.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A310F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.8.2 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A310F
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/2 attempt)..unsuccessful
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (2/2 attempt)..unsuccessful
This version of "sBoot" is not supported, try to change "sBoot"!
Operation was failed!
Performed by 2.6.8.2 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A310F
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...
Upload Mode interface not found!
Operation was canceled
Performed by 2.6.8.2 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A310F
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Operation was canceled
Performed by 2.6.8.2 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: SM-A310F
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM3
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/2 attempt)..success
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.8.2 Software version.

thanks
 
boss pa pm pass. tanong lang po sported bato sa version 7.0
 
You must log in or register to reply here.
Who read this thread (Total readers: 0)
No registered users viewing this thread.
Back
Top