Sm-a505gn bit4 touch not working after update.
Put the phone in recovery mode, the firmware is a505gndxu4asl2
Download the firmware from sammobile.com the firmware a505gndxs4ask2 which is lower build.
Need to use otg cable for phone, connect mouse, go to settings-about-click build 5 times to open developer, enable oem and usb debugging.
Need also to delete google account if on.
Run z3x pro v39.6
Load the firmware: to bl, pda, cp, csc(csc_omc_olo_a505gnolo4ask2)
Phone in download mode, connect usb cable to pc
Click flash
Wait until flashing done.
Ok na, setup mo na lang.
Put the phone in recovery mode, the firmware is a505gndxu4asl2
Download the firmware from sammobile.com the firmware a505gndxs4ask2 which is lower build.
Need to use otg cable for phone, connect mouse, go to settings-about-click build 5 times to open developer, enable oem and usb debugging.
Need also to delete google account if on.
Run z3x pro v39.6
Load the firmware: to bl, pda, cp, csc(csc_omc_olo_a505gnolo4ask2)
Phone in download mode, connect usb cable to pc
Click flash
Wait until flashing done.
Ok na, setup mo na lang.