SM-G313HZ Unlocking in Z3x box Warning

[stigmatized]

gawan ko lang po ng thread

dahil po sa thread na giawa ni boss pogz Samsung Tool 18.2 Bakit ganito - Ant.ph
naisip kong mag search dahil hindi pa din ako nakaka tanggap ng ganitong unit...

base po sa isang blog na nakita ko​

The phone is introduced in the Philippines as Galaxy V. But world wide this phone is known as Samsung Galaxy Ace NXT.
A friendly reminder to all that when you are unlocking this phone in Z3x box, use only Read Code method.

Do not attempt to Click on Direct Unlock, the phone's baseband will be damaged.

But you can still fix your phone by Flashing the phone's original firmware.

When flashing, YOU MUST include the pit file. If you did not include it when flashing the IMEI is still damage or the baseband is still damage.

I also encountered that when you try to unlock the phone again, and root the phone. The IMEI or the baseband will be damaged again.

Be cautious with this phone as of the moment.​

Para po sa sa Stock Rom and Flasher And Drivers

Download This Files

Odin 3.07

Firmware Part 1 Form sendspace

Firmware Part 2 From sendspace

Firmware Part 3 From sendspace

"Use HJSplit to JOIN all parts of the files"

HJSplit​

Eto Po Yung Complete Procedure​

Installing the driver

1. Install driver first just keep on hitting next.
2. After installing the driver Press and Hold Volume Down + Home Key + Power Button, a selection will appear if you would like to go in Download Mode, Press Volume Up to proceed in Download Mode.
3. Connect your phone in the PC via USB Cable
4. Wait for it to finish installing the driver.
"Note: Sometimes it is better to reboot your PC. After installing the driver."

BEFORE PROCEEDING IN FLASHING MAKE SURE THAT THE BATTERY IS FULLY CHARGED OR 50% CHARGED.


Flashing your Phone
1. Open Odin 3.07
2. Load the following file. PDA, Phone, CSC. No need to overwrite Boot. And its okey to not include the pit file. If you only fixing bootloop. If you are fixing damage baseband include the PIT file and bootloader, because that is what I did when i fixed the damaged baseband when unlocking the phone in Z3x.

PIT --> VIVALTO3GVN_DB_OPEN.pit
Bootloader --> BL_G313HZDBU0ANH1_1946331_REV04_user_low_ship.tar.md5
PDA --> AP_G313HZDBU0ANH1_1946331_REV04_user_low_ship.tar.md5
Phone --> CP_G313HZDXU0ANH1_1946331_REV04_user_low_ship.tar.md5
CSC --> CSC_OLB_G313HZOLB0ANH1_1946331_REV04_user_low_ship.tar.md5

3. Do not check repartition in option key, copy only what is shown in the picture above.
4. When you are ready to flash your phone, Press and Hold Volume Down + Home Key + Power Button, a selection will appear if you would like to go in Download Mode, Press Volume Up to proceed in Download Mode.
5. Connect your phone in the PC via USB Cable, wait for a value in the ID:COM to appear. It will turn yellow with number example: COM32, if it nothing appear close Odin an open it again and load the file again.
6. Press START to proceed flashing your phone. Wait until it is done, the phone will reboot after flashing.
​

For Rooting Problem On This Model: SM-G313HZ
Android version: 4.4.2
flash G313HZDDU0ANH2_ROOT.tar and use kingo root

 

[tiger26]

salamat sa pagshare boss...laking tulong po eto sa lahat dahil complete procedure.

 

[Lhord]

maraming salamat boss.. very usefull info...