octoplus
c3303k cable uart
follow to the command octoplus
))
https://s7.postimg.cc/ackfznde3/image.png
7. Reset FRP/Reactivation Lock
Method 1. Via UART (EMMC memory chip)
Click "Reset FRP/Reactivation" button.
Connect the phone to Box via Samsung Micro UART cable.
Press and hold "Vol-" and "Power" buttons for 15-20 seconds.
Wait until the software will ask you to connect Micro USB cable.
Connect the phone to PC via Micro USB cable. Software will read some data.
Connect again the phone to Box via Samsung Micro UART cable.
Press and hold "Vol-" and "Power" buttons for 15-20 seconds.
Follow software instructions (prompts)
Welcome to Octoplus Box Samsung software version 2.6.7
-----------------------------------------------------------------------------------
To connect SM-G610Y phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-G610Y
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM7
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM7
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..success
FRP / Reactivation lock is successfully reseted!)
Performed by 2.6.7 Software version.
c3303k cable uart
follow to the command octoplus
))https://s7.postimg.cc/ackfznde3/image.png
7. Reset FRP/Reactivation Lock
Method 1. Via UART (EMMC memory chip)
Click "Reset FRP/Reactivation" button.
Connect the phone to Box via Samsung Micro UART cable.
Press and hold "Vol-" and "Power" buttons for 15-20 seconds.
Wait until the software will ask you to connect Micro USB cable.
Connect the phone to PC via Micro USB cable. Software will read some data.
Connect again the phone to Box via Samsung Micro UART cable.
Press and hold "Vol-" and "Power" buttons for 15-20 seconds.
Follow software instructions (prompts)
Welcome to Octoplus Box Samsung software version 2.6.7
-----------------------------------------------------------------------------------
To connect SM-G610Y phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-G610Y
Operation: Reset FRP - UART EMMC
Searching for UART interface.. COM7
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Rebooting phone in Upload Mode...OK
Please connect phone to USB cable..
Searching for a phone. Please wait...OK
Reading data...
Checking operation...OK
Searching for UART interface.. COM7
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Phone found.
Resetting FRP lock (1/4 attempt)..success
FRP / Reactivation lock is successfully reseted!
)Performed by 2.6.7 Software version.
