Sm-g955fd bit1 frp done
Using z3x box - Need to flash first combination firmware COMBINATION_FA70_G955FXXU1AQDB_Halabtech.tar
After complete flashing, phone will reboot in factory binary. Power off the phone.
Next is to flash the stock firmware G955FXXU1AQL5_G955FOXM1AQL5_KSA (this is the firmware of the phone at frp state)
Using z3x box – load the extracted firmware (bl, ap, csc)
In boot- bl file put check to sboot.bin (uncheck others)
In pda – ap file put check to boot+recovery+system (uncheck others)
In Phone – no file
In csc – select home csc, put check to cache (uncheck other)
Now connect phone in download mode then click flash
Wait until done – phone will reboot and open without frp.
Using z3x box - Need to flash first combination firmware COMBINATION_FA70_G955FXXU1AQDB_Halabtech.tar
After complete flashing, phone will reboot in factory binary. Power off the phone.
Next is to flash the stock firmware G955FXXU1AQL5_G955FOXM1AQL5_KSA (this is the firmware of the phone at frp state)
Using z3x box – load the extracted firmware (bl, ap, csc)
In boot- bl file put check to sboot.bin (uncheck others)
In pda – ap file put check to boot+recovery+system (uncheck others)
In Phone – no file
In csc – select home csc, put check to cache (uncheck other)
Now connect phone in download mode then click flash
Wait until done – phone will reboot and open without frp.