Link! https://mega.nz/#!qp1H0JIJ!FJc9XQo9VRm7Wf6aKi3MSJkspD5BsPHXeXuczNwHMR4
password protected
Card found : S/N : D7DD09BA , v0135
Chinese Miracle II [MTK module] v 1.58
Operation : Check / Read Info [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 25 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303034473930100CDE05408019
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 110100303034473930100CDE05408019
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID : 0xAF8B3DA8DC1ECCE6A1E881EBDB7876D7
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
[AP] : Initial info read Ok!
Brand : alps
ProdName : mtk6589_wet_lca
ProdModel : SM-J5008
Device : mtk6589_wet_lca
AndroidVer: 5.1.1
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1.8
Done!
Elapsed: 00:00:31
Reconnect Power/Cable!
Scatter Load Ok , BaseBand : MT6572 , Project : benrui72_wet_jb3 , Storage : EMMC
Files found : 11 , Set to Flash : 10
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : alps
Device Model : mtk6589_wet_jb3
Device CPU : MT6572
Device IntName : mtk6589_wet_jb3
Device Version : 5.1.1
Device Compile : 23-Dec-15 12:03:41 PM
Device Project : ALPS.JB3.MP.V1.8
Device ExtInfo : SM-J5008
Ready to Flash!
Operation : Read Flash [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 25 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303034473930100CDE05408019
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 110100303034473930100CDE05408019
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID : 0xAF8B3DA8DC1ECCE6A1E881EBDB7876D7
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
Read Ok , collect info
Brand : alps
ProdName : mtk6589_wet_lca
ProdModel : SM-J5008
Device : mtk6589_wet_lca
AndroidVer: 5.1.1
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1.8
Saved to : C:\Users\server02\Downloads\firmware\MT6572__alps__SM-J5008__mtk6589_wet_jb3__5.1.1__ALPS.JB3.MP.V1.8 By Tabrez\MT6572__ALPS__SM-J5008__ALPS.JB3.MP.V1.8__Android_5.1.1.ispff
Done!
Elapsed: 00:14:55
Reconnect Power/Cable!
