Sm-j730g u5 custom binary blocked by frp.
Owner do the update via wifi and it failed.
1 – flash stock firmware J730GDXU5BRI3_J730GOLB5BRI3_GLB (downloaded from sammobile).
after successsfull flashing, have frp.
2 - using odin, flash combination file COMBINATION_OXA_FA70_J730GDXU5ARI1(downloaded from z3x support). Load bl, ap, cp, home csc). After successful flashing, phone will open in factory binary. Power off phone.
3 - using z3x, flash official firmware J730GDXU5BRI3_J730GOLB5BRI3_GLB -only System + Recovery + Sboot + Boot (downloaded from sammobile)
Extract the firmware, run z3x = select flash = click boot, load the bl file put check only to sboot(uncheck others).
Click ap, load the ap file put check system+recovery+boot(uncheck others)
4 - after successful flashing, phone will open completely, go to settings-about phone-software information-tap build several times until developer on, activate debugging, activate oem and then enter general adjustment, factory data reset and ready
frp done
Owner do the update via wifi and it failed.
1 – flash stock firmware J730GDXU5BRI3_J730GOLB5BRI3_GLB (downloaded from sammobile).
after successsfull flashing, have frp.
2 - using odin, flash combination file COMBINATION_OXA_FA70_J730GDXU5ARI1(downloaded from z3x support). Load bl, ap, cp, home csc). After successful flashing, phone will open in factory binary. Power off phone.
3 - using z3x, flash official firmware J730GDXU5BRI3_J730GOLB5BRI3_GLB -only System + Recovery + Sboot + Boot (downloaded from sammobile)
Extract the firmware, run z3x = select flash = click boot, load the bl file put check only to sboot(uncheck others).
Click ap, load the ap file put check system+recovery+boot(uncheck others)
4 - after successful flashing, phone will open completely, go to settings-about phone-software information-tap build several times until developer on, activate debugging, activate oem and then enter general adjustment, factory data reset and ready
frp done