- Joined
- Feb 16, 2015
- Messages
- 92
- Reaction score
- 14
- Points
- 1
Code:
Action : Write Flash
Tips:
1.Remove Battery, Insert usb cable, Insert battery
2.power off Phone, Remove & Reinsert Battery , insert USB Cable
(In Case Some Phone Required to hold bootkey)
Waiting for Phone Usb...
Phone found [ USB Port:COM10 ]
Connecting...
Connection Done.
Read CPU Info...
CPU_ID: 6261
CPU_SW: CB01
CPU_HW: 8000
uploading boot image to RAM...
Handshake Received from Phone.
uploading boot image to RAM...
Handshake Received from Phone.
CHIP : MT6261
CPU ID : 00000000
NOR ID : 00EF007000160000
NOR Size : 4MB
NOR Name : [Winbond] SF_W25Q32JV
NAND ID : 0000000000000000
NAND Size: 0MB
NAND Name: Nand:N/A
Boot Information completed.
Reading Phone Info...
Project ID: NX9_61D_240_V1_8_MRC_DZ09_W90_32_T3_L3_C4_G4_B_TN_161205
checking uid protection...
not found, it is safe.
Programming Flash Image...
Erasing..
Erasing done, Programming ...
Load File : C:\Users\ernie\Desktop\smart watchs
Programming Flash Image Completed.
Action completed
Time taken : 00:01:01
Reconnect Battery/USB Cable
CS-Tool Ver 1.48
Last edited by a moderator:
