Sony 9X Backup Flashtool

[crewdance]

Model: Sony 9X
Problem: Hang Up
Password Protected: pm niyo nalang po ako
Firmware:Sony 9X Clone

Nagok nman sa hard reset so kaya backup ko na din sa Merapi Tool.
PaFeedback nlng Kung Tested Salamat!

 

[JULAY20]

salamat dito boss marame na matotolongan mo nito

 

[no2indent]

Salamat sa pag share ng Firmware boss crewdance

 

[no2indent]

Boss tested..^_^

https://s16.postimg.org/9kem7vu11/20161118225927.jpg

 

[Ligalig]

need password for this..

 

[Ligalig]

REPORTING: TESTED!

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 25 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464A3235414202327E9A1DB2A9
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BA52J
[eMMC] : FLASH_CID : 150100464A3235414202327E9A1DB2A9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xB9EEEB7E6F397CBF59AADBA066111F4D
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6580 , Project : mtk_android , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3697 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000000380000-0x0000000000500000
Erase : 0x0000000001C80000-0x00000000E6300000
Flash Pre-Erase Done, time used : 00:00:02

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0014
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:07:43

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : SYSTEM
Verify Passed : CACHE
Verify Passed : USERDATA
Data Verify Done, time used : 00:00:29

Update Mirror PMT
Update Done!

 

[huffadz]

Model: Sony 9X
Problem: Hang Up
Password Protected: pm niyo nalang po ako
Firmware:Sony 9X Clone

Nagok nman sa hard reset so kaya backup ko na din sa Merapi Tool.
PaFeedback nlng Kung Tested Salamat!

boss ano po pass... salamat

 

[huffadz]

Model: Sony 9X
Problem: Hang Up
Password Protected: pm niyo nalang po ako
Firmware:Sony 9X Clone

Nagok nman sa hard reset so kaya backup ko na din sa Merapi Tool.
PaFeedback nlng Kung Tested Salamat!

boss tested 100% ung file mo sa nck ko ginawa...

 

[JULAY20]

post mo boss

 

[huffadz]

post mo boss

ok boss mmya at nka backup na rin sa cm2

 

[riel]

Password please. TIA

 

[riel]

Password po.. TIA

 

[PERRYJUN]

pa pm din po nito...

 

[riel]

Tested ang firmware.. Slamat idol TS.

 

[bertzki_101]

boss pa pm password tnx....

 

[twistedblitz]

nice sharing idol....laking tulong nito.....

 

[= CyberSlave =]

sir pa pm po ng password salamat