sony ericsson experia x10i too many pattern atempts done ky octupos box...[Reference]
MODEL: sony ericsson XPERIA model x10i
PHONE STATUS: too many pattern attempts
una ko ginawa reset pattern unlock sa octoplus suite no luck reset ko din sa SETOOL3 no luck din, free update naman ako ky SONy UPDATE NEW version NO LUCK sabi ni sony updater files not foud kaya napaisip ko e program ulit at nag download ako ng firmware x10i sa octopus support kaya program ko siya at naging successful naman ang ginawa ko at di ako nabigo...
TOOLS.
1. octupos box
2. usb cable 101
PROCEDURE:
OPEN OCTOPLUS SUITE version 1.2.8
download firmware on octopus support
Write firmware
1. Install necessary drivers (drivers are located in "Drivers" folder);
2. Select firmware file;
3. Press "Write firmware" button;
4. Reconnect battery;
5. Press "Back" button and connect phone with Micro USB cable directly to motherboard USB 6. port (don't use USB hubs!).
7. Follow software instructions (promts);
PICTURE
TOO MANY PATTERN ATTEMPTS






FOR REFERENCE
log's
Platform: SE Qualcomm
Selected model: X10i
Opening "X10i_2.1.A.0.435_GLOBAL-GGL GENERIC 1232-9897_2.oct"...OK
Please, reconnect battery, hold "back" key and connect USB cable...OK
Reading info...
Chipset: S1 QSD8250
IMEI: 359419-03-244723-6
MSN: CB511H6EJJ
Sending loader...OK
Writing Firmware...
Writing AMSS...OK
Writing AMSS_FS...OK
Writing CACHE...OK
Writing DSP1...OK
Writing FOTA0...OK
Writing FOTA1...OK
Writing KERNEL...OK
Writing SYSTEM...OK
Writing USERDATA...OK
Shutting down...OK
MODEL: sony ericsson XPERIA model x10i
PHONE STATUS: too many pattern attempts
una ko ginawa reset pattern unlock sa octoplus suite no luck reset ko din sa SETOOL3 no luck din, free update naman ako ky SONy UPDATE NEW version NO LUCK sabi ni sony updater files not foud kaya napaisip ko e program ulit at nag download ako ng firmware x10i sa octopus support kaya program ko siya at naging successful naman ang ginawa ko at di ako nabigo...
TOOLS.
1. octupos box
2. usb cable 101
PROCEDURE:
OPEN OCTOPLUS SUITE version 1.2.8
download firmware on octopus support
Write firmware
1. Install necessary drivers (drivers are located in "Drivers" folder);
2. Select firmware file;
3. Press "Write firmware" button;
4. Reconnect battery;
5. Press "Back" button and connect phone with Micro USB cable directly to motherboard USB 6. port (don't use USB hubs!).
7. Follow software instructions (promts);
PICTURE
TOO MANY PATTERN ATTEMPTS






FOR REFERENCE
log's
Platform: SE Qualcomm
Selected model: X10i
Opening "X10i_2.1.A.0.435_GLOBAL-GGL GENERIC 1232-9897_2.oct"...OK
Please, reconnect battery, hold "back" key and connect USB cable...OK
Reading info...
Chipset: S1 QSD8250
IMEI: 359419-03-244723-6
MSN: CB511H6EJJ
Sending loader...OK
Writing Firmware...
Writing AMSS...OK
Writing AMSS_FS...OK
Writing CACHE...OK
Writing DSP1...OK
Writing FOTA0...OK
Writing FOTA1...OK
Writing KERNEL...OK
Writing SYSTEM...OK
Writing USERDATA...OK
Shutting down...OK