xperia d2306 encryption unsuccessfull done by flashing using setool
open setool
click pda - select correct model
add firmware (app-sw/fsp/elabel)
click settings
put check on signed mode
click pda again
press flash
connect to pc by holding vol down
flashing starts
wait till done
https://i.postimg.cc/h4YrmCLh/d2306-oi.png
firmware version used: 18.0.c.1.13 downloaded from setool support
open setool
click pda - select correct model
add firmware (app-sw/fsp/elabel)
click settings
put check on signed mode
click pda again
press flash
connect to pc by holding vol down
flashing starts
wait till done
https://i.postimg.cc/h4YrmCLh/d2306-oi.png
firmware version used: 18.0.c.1.13 downloaded from setool support