PaczWafu
Registered
Pa help naman po sa error 4032 may solution pa po ba eto?
PinoyTechnician
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
SP Flashtool Error 4032 HELP
- Thread starter PaczWafu
- Start date
J
joggaboy2
Anonymous
paki poss po ang case at status ng cellphone na nag eerros sa spflashtool
mas maganda po kung complete info at may screen shot para po mas madali kau matulungan boss
mas maganda po kung complete info at may screen shot para po mas madali kau matulungan boss
PaczWafu
Registered
Lenovo A850 pinogram ko nag tuloy naman program tapos di na mabuhay program ko ulit error 4032 na
J
joggaboy2
Anonymous
eto po madalas na solution jan...
paste ko lang po from quoted post of boss clamix_myn
1.open flash tool
2.load scatter file
3.press control+alt+v (para lumabas ang advance mode)
4.punta sa format tab
5.auto flag format (select format whole flash)
6.erase flag ( select forcedly erase bad blocked mark is erased)
CLICK FORMAT.....AFTER FORMAT BALIK SA DOWNLOAD TAB
7. balik sa download tab
8.click option or press control O
9.click ang connection
10. set to without battery
11.tick download sa baba nang connection
13. unckeck DA DL WITH CHECKSUM
14.PUT CHECK SA PHYSICAL FORMAT/READ BACK
after ma set lahat nang settings
15. select format + download
yan boss baka sa kaling mag tuloy ang flashing...
kung ayaw pa din hanap ka po sp flash tool
SP_Flash_Tool_v5.1408.00...
pag ganun pa din po hardware fault na po yan... mild reheat lang sa chips boss
paste ko lang po from quoted post of boss clamix_myn
1.open flash tool
2.load scatter file
3.press control+alt+v (para lumabas ang advance mode)
4.punta sa format tab
5.auto flag format (select format whole flash)
6.erase flag ( select forcedly erase bad blocked mark is erased)
CLICK FORMAT.....AFTER FORMAT BALIK SA DOWNLOAD TAB
7. balik sa download tab
8.click option or press control O
9.click ang connection
10. set to without battery
11.tick download sa baba nang connection
13. unckeck DA DL WITH CHECKSUM
14.PUT CHECK SA PHYSICAL FORMAT/READ BACK
after ma set lahat nang settings
15. select format + download
yan boss baka sa kaling mag tuloy ang flashing...
kung ayaw pa din hanap ka po sp flash tool
SP_Flash_Tool_v5.1408.00...
pag ganun pa din po hardware fault na po yan... mild reheat lang sa chips boss
PaczWafu
Registered
ayaw pa rin 4032 pa rin