PROBLEM:
Share ko lang nagawa ko sony xperia ST25i hang sa logo lang
Sabi ng customer nag-hard reset lang daw siya tapos pag restart
hang logo lang siya.
Una try ko sony companion pero ayaw mag connect,error siya
Nag try naman ako sa SETOOL download ako sa support ng firmware pero patay ang unit only vibrate lang,buti may nahanap ako na solution sa problem
ko.
ito guide niya Download this files
(Flashtool) Dev-Host - flashtool-0.9.11.0-windows.exe - The Ultimate Free File Hosting / File Sharing Service
(Firmware) Dev-Host - Xperia U (ST25i)_6.1.1.B.1.89 ICS 4.0.4_Tim Italy By Shisma.ftf - The Ultimate Free File Hosting / File Sharing Service
Now to start the process:
1. After installing Flashtool, open the following path C:\Flashtool\firmwares and delete all content in that folder.
2. Copy the Firmware (.ftf) file that you downloaded and paste it in the ‘firmwares’ folder.
3. Run Drivers.exe (located in C:\Flashtool\Drivers) and install drivers for Xperia P, U, Sola & Go and also select Flashmode and Fastboot drivers, let them install.
4. Open Flashtool and select the Black Bolt icon and choose ‘Flashmode’
5. After the next window appears select your firmware (i.e Xperia U 6.1.1.B.1.89 ST25i)
6. Make sure all the options that are displayed in the screenshot above are ticked. (NOTE: If you own an Xperia U ST25a then select ‘Exclude Baseband’)
7. Press OK and wait for Flashtool to prepare the firmware for flashing on your Xperia U.
8. Once it is done preparing it will ask you to connect your phone, follow the steps written here:
Power Off your Xperia U.
Put it in ‘Flashmode’ by holding the volume down button and connecting the USB Cable until the transparent bar turns green.
Keep holding the volume down button until the percentage bar starts progressing, after it has reached 5% then let go of the volume button.
If it gets stuck anywhere just wait 20-30 seconds and it will continue itself.
9. Once the Flashtool Log displays: ‘Flashing Finished’, remove the USB Cable from the phone and let it reboot. It may take up to 5 minutes. After it has rebooted, you may set up your Google Account and once you’re at the homescreen, reboot the phone once more.
10. After it has rebooted the second time, you may normally use your phone.
Screenshot pic's ng unit;
SOLVED MY PROBLEM kALA KO ABUNO NA NAMAN:wink:
Share ko lang nagawa ko sony xperia ST25i hang sa logo lang
Sabi ng customer nag-hard reset lang daw siya tapos pag restart
hang logo lang siya.
Una try ko sony companion pero ayaw mag connect,error siya
Nag try naman ako sa SETOOL download ako sa support ng firmware pero patay ang unit only vibrate lang,buti may nahanap ako na solution sa problem
ko.
ito guide niya Download this files
(Flashtool) Dev-Host - flashtool-0.9.11.0-windows.exe - The Ultimate Free File Hosting / File Sharing Service
(Firmware) Dev-Host - Xperia U (ST25i)_6.1.1.B.1.89 ICS 4.0.4_Tim Italy By Shisma.ftf - The Ultimate Free File Hosting / File Sharing Service
Now to start the process:
1. After installing Flashtool, open the following path C:\Flashtool\firmwares and delete all content in that folder.
2. Copy the Firmware (.ftf) file that you downloaded and paste it in the ‘firmwares’ folder.
3. Run Drivers.exe (located in C:\Flashtool\Drivers) and install drivers for Xperia P, U, Sola & Go and also select Flashmode and Fastboot drivers, let them install.
4. Open Flashtool and select the Black Bolt icon and choose ‘Flashmode’
5. After the next window appears select your firmware (i.e Xperia U 6.1.1.B.1.89 ST25i)
6. Make sure all the options that are displayed in the screenshot above are ticked. (NOTE: If you own an Xperia U ST25a then select ‘Exclude Baseband’)
7. Press OK and wait for Flashtool to prepare the firmware for flashing on your Xperia U.
8. Once it is done preparing it will ask you to connect your phone, follow the steps written here:
Power Off your Xperia U.
Put it in ‘Flashmode’ by holding the volume down button and connecting the USB Cable until the transparent bar turns green.
Keep holding the volume down button until the percentage bar starts progressing, after it has reached 5% then let go of the volume button.
If it gets stuck anywhere just wait 20-30 seconds and it will continue itself.
9. Once the Flashtool Log displays: ‘Flashing Finished’, remove the USB Cable from the phone and let it reboot. It may take up to 5 minutes. After it has rebooted, you may set up your Google Account and once you’re at the homescreen, reboot the phone once more.
10. After it has rebooted the second time, you may normally use your phone.
Screenshot pic's ng unit;
SOLVED MY PROBLEM kALA KO ABUNO NA NAMAN:wink:
