ACTIVE LINK
MOD OR SMOD pa-copy na lang po new link sa 1st page at paki delete yung message ko na ma walang password kasi na-copy paste sa kabila kaya upload ko ulit bago with security copy paste nya thread ko eh...
Copy ko na nga lang sa TEAM copy rin sa akin at nagbigay pa ako credit sa ORIG AUTHOR...
ACTIVE LINK
MOD OR SMOD pa-copy na lang po new link sa 1st page at paki delete yung message ko na ma walang password kasi na-copy paste sa kabila kaya upload ko ulit bago with security copy paste nya thread ko eh...
Copy ko na nga lang sa TEAM copy rin sa akin at nagbigay pa ako credit sa ORIG AUTHOR...
ACTIVE LINK
MOD OR SMOD pa-copy na lang po new link sa 1st page at paki delete yung message ko na ma walang password kasi na-copy paste sa kabila kaya upload ko ulit bago with security copy paste nya thread ko eh...
Copy ko na nga lang sa TEAM copy rin sa akin at nagbigay pa ako credit sa ORIG AUTHOR...

Starmobile PLAY CLick
![]()
Note:
*Team YuniX Only Have This Starmobile PLAY CLick Firmware First Created,So Don,t Leech (y)
* I'm not responsible for any damages will be held! Do at your own risk!
* Rooted system on .PAC file
* Follow instructions!
* This will delete your installed user apps!
*Please Do a Full Wipe/Factory Reset Before Flashing Thanks
For:
Bootloop
* Recovery loop
* Stuck at logo
* Black screen
* Hardbrick / Softbrick
Features?
All Stock Starmobile PLAY Click [Removed Bloatwares]
Open Line/Unlocked
Rooted Via SuperSU
TWRP Recovery Installed
INSTRUCTIONS/PROCEDURES
Code:[COLOR="Lime"]Part One: Installing drivers 1. Extract the driver file. 2. Run dpinst.exe . Note that "x86" folder is for 32-bit computer while "amd64" is for 64-bit computer 3. We have to verify if the driver is installed, right-click on My Computer(WinXP)/Computer(Win7)/This PC(Win8) then Manage>Device Manager 4. Turn off your phone and remove the battery then insert back the battery again. 5. We have to first detect the phone to PC if its driver is working. Plug in the micro USB cord to your phone first but don't connect the USB cord to PC itself. 6. Timing is important! Hold volume down then immediately plug in the USB cord to your PC. 7. A poped-up notification appear to show if the drivers are successfully installed. 8. You may now remove the USB cord to the PC if success but don't remove yet the micro USB cord to your phone. 9. Now, we are ready to use Research Download! Part Two: Using Research Download 1. Extract Research Download file 2. Extract your downloaded stock ROM file 3. Run ResearchDownload.exe 4. Click the first gear button. This will open up a browse menu. Use this to locate your .PAC file then click "Open" button. 5. Once the PAC file is loaded click play button . 6.Connect your Starmobile Play Click (while holding volume down) 7.You should see in research download that it has started flashing! (you can let go of the volume key now). When it is finished just press the stop button and disconnect your phone![/COLOR]
Links:
PAC FILE/STOCK ROM
SPREADTRUM DRIVER
RESEARCH DOWNLOADER/FLASHER
And Also Special Thanks to the Yunix Team...
Virlito Tumamak Inocencio [Full Support]
Ezra Ramos Monteclaro[Porter]
Raymond [Basta alam na]
Team YuniX
XDA
ETC.
Just Hit only the Thanks Button...![]()
\ACTIVE LINK
MOD OR SMOD pa-copy na lang po new link sa 1st page at paki delete yung message ko na ma walang password kasi na-copy paste sa kabila kaya upload ko ulit bago with security copy paste nya thread ko eh...
Copy ko na nga lang sa TEAM copy rin sa akin at nagbigay pa ako credit sa ORIG AUTHOR...
p pm pass sir
REPORT KO LANG PO.
di ko na po ginawan ng bagong thread kasi may bugs po ang sw..
may issue po sa wifi, nakakabrowse pero di makaconnect
tnxz.

Starmobile PLAY CLick
![]()
Note:
*Team YuniX Only Have This Starmobile PLAY CLick Firmware First Created,So Don,t Leech (y)
* I'm not responsible for any damages will be held! Do at your own risk!
* Rooted system on .PAC file
* Follow instructions!
* This will delete your installed user apps!
*Please Do a Full Wipe/Factory Reset Before Flashing Thanks
For:
Bootloop
* Recovery loop
* Stuck at logo
* Black screen
* Hardbrick / Softbrick
Features?
All Stock Starmobile PLAY Click [Removed Bloatwares]
Open Line/Unlocked
Rooted Via SuperSU
TWRP Recovery Installed
INSTRUCTIONS/PROCEDURES
Code:[COLOR="Lime"]Part One: Installing drivers 1. Extract the driver file. 2. Run dpinst.exe . Note that "x86" folder is for 32-bit computer while "amd64" is for 64-bit computer 3. We have to verify if the driver is installed, right-click on My Computer(WinXP)/Computer(Win7)/This PC(Win8) then Manage>Device Manager 4. Turn off your phone and remove the battery then insert back the battery again. 5. We have to first detect the phone to PC if its driver is working. Plug in the micro USB cord to your phone first but don't connect the USB cord to PC itself. 6. Timing is important! Hold volume down then immediately plug in the USB cord to your PC. 7. A poped-up notification appear to show if the drivers are successfully installed. 8. You may now remove the USB cord to the PC if success but don't remove yet the micro USB cord to your phone. 9. Now, we are ready to use Research Download! Part Two: Using Research Download 1. Extract Research Download file 2. Extract your downloaded stock ROM file 3. Run ResearchDownload.exe 4. Click the first gear button. This will open up a browse menu. Use this to locate your .PAC file then click "Open" button. 5. Once the PAC file is loaded click play button . 6.Connect your Starmobile Play Click (while holding volume down) 7.You should see in research download that it has started flashing! (you can let go of the volume key now). When it is finished just press the stop button and disconnect your phone![/COLOR]
Links:
PAC FILE/STOCK ROM
SPREADTRUM DRIVER
RESEARCH DOWNLOADER/FLASHER
And Also Special Thanks to the Yunix Team...
Virlito Tumamak Inocencio [Full Support]
Ezra Ramos Monteclaro[Porter]
Raymond [Basta alam na]
Team YuniX
XDA
ETC.
Just Hit only the Thanks Button...![]()
buti nalang ok pa ang link tested talaga itong firmware mo bossing kaya ikaw nnmn hinahanap ko nabura ko kasi dl ko samalamat muliStarmobile PLAY CLick
![]()
Note:
*Team YuniX Only Have This Starmobile PLAY CLick Firmware First Created,So Don,t Leech (y)
* I'm not responsible for any damages will be held! Do at your own risk!
* Rooted system on .PAC file
* Follow instructions!
* This will delete your installed user apps!
*Please Do a Full Wipe/Factory Reset Before Flashing Thanks
For:
Bootloop
* Recovery loop
* Stuck at logo
* Black screen
* Hardbrick / Softbrick
Features?
All Stock Starmobile PLAY Click [Removed Bloatwares]
Open Line/Unlocked
Rooted Via SuperSU
TWRP Recovery Installed
INSTRUCTIONS/PROCEDURES
Code:[COLOR="Lime"]Part One: Installing drivers 1. Extract the driver file. 2. Run dpinst.exe . Note that "x86" folder is for 32-bit computer while "amd64" is for 64-bit computer 3. We have to verify if the driver is installed, right-click on My Computer(WinXP)/Computer(Win7)/This PC(Win8) then Manage>Device Manager 4. Turn off your phone and remove the battery then insert back the battery again. 5. We have to first detect the phone to PC if its driver is working. Plug in the micro USB cord to your phone first but don't connect the USB cord to PC itself. 6. Timing is important! Hold volume down then immediately plug in the USB cord to your PC. 7. A poped-up notification appear to show if the drivers are successfully installed. 8. You may now remove the USB cord to the PC if success but don't remove yet the micro USB cord to your phone. 9. Now, we are ready to use Research Download! Part Two: Using Research Download 1. Extract Research Download file 2. Extract your downloaded stock ROM file 3. Run ResearchDownload.exe 4. Click the first gear button. This will open up a browse menu. Use this to locate your .PAC file then click "Open" button. 5. Once the PAC file is loaded click play button . 6.Connect your Starmobile Play Click (while holding volume down) 7.You should see in research download that it has started flashing! (you can let go of the volume key now). When it is finished just press the stop button and disconnect your phone![/COLOR]
Links:
PAC FILE/STOCK ROM
SPREADTRUM DRIVER
RESEARCH DOWNLOADER/FLASHER
And Also Special Thanks to the Yunix Team...
Virlito Tumamak Inocencio [Full Support]
Ezra Ramos Monteclaro[Porter]
Raymond [Basta alam na]
Team YuniX
XDA
ETC.
Just Hit only the Thanks Button...![]()
Fix Emergency Calls_Null_Invalid Imei Starmobile Play Click
password protected...
nice reference boss and thanks for sharing
Fix Imei, Signal, Null, Invalid / Open Line.zip
Steps
1. Boot into TWRP Recovery
2. Tap “Install†TAB
3. Locate the “ Fix Imei, Signal, Null, Invalid / Open Line.zip â€
4. And Swipe to Install
5. Reboot and Done.
Fix Emergency Calls_Null_Invalid Imei Starmobile Play Click
password protected...
ACTIVE LINK
MOD OR SMOD pa-copy na lang po new link sa 1st page at paki delete yung message ko na ma walang password kasi na-copy paste sa kabila kaya upload ko ulit bago with security copy paste nya thread ko eh...
Copy ko na nga lang sa TEAM copy rin sa akin at nagbigay pa ako credit sa ORIG AUTHOR...

Fix Imei, Signal, Null, Invalid / Open Line.zip
Steps
1. Boot into TWRP Recovery
2. Tap “Install†TAB
3. Locate the “ Fix Imei, Signal, Null, Invalid / Open Line.zip â€
4. And Swipe to Install
5. Reboot and Done.
Fix Emergency Calls_Null_Invalid Imei Starmobile Play Click
password protected...