starmobile play spark logo hang done

[madarati]

share ko lang mga boss dati na ako may thread nito may tanggap ulit ako logo hang, flash ko agad using research download pero ayaw na magkonect, pero dati ko naman ng ginagamit kaya naisip ko baka sa tools na na gamit ko kaya nagdownload ako ng latest spd flastool​

https://spdflashtool.com/download/spd-flash-tool-r17-0-0001​

pac file here tested many times​

http://www.mediafire.com/file/epnel0x33n5jmt9/starmobile_play+spark.rar​

request nalang po ng password sa tatsulok​

#ANTGSM​

 

[kukoto000]

Boss pa pm nman po password

 

[alexan]

tested po
sa cm2 ko po tinira..

Card found: S/N : 9C981647 , v0136
Chinese Miracle II  [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Generic 4.x-5.0]

Loading    : starmobile_play spark.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC7730_UMS
PacVersion : 20150907
FastCheck  : 0x004DD360C6

Loading files ... 

File : fdl1.bin
File : fdl2.bin
File : nvitem_FS046_G4B15.bin
File : wcnnvitem.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : wmodem.bin
File : wdsp.bin
File : wcnmodem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : logo_kernel.bmp
File : logo_uboot.bmp
File : cache.img
File : u-boot.bin
File : SC7730_UMS.xml

Load Ok!

Operation : Flash [ v1.27 ]

======= Flash
Files set for flashing : 
[ MCU ] : starmobile_play spark.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : SC7730_UMS
PacVersion : 20150907
File : fdl1.bin
File : fdl2.bin
File : nvitem_FS046_G4B15.bin
File : wcnnvitem.bin
File : prodnv.img
File : u-boot-spl-16k.bin
File : wmodem.bin
File : wdsp.bin
File : wcnmodem.bin
File : boot.img
File : recovery.img
File : system.img
File : userdata.img
File : logo_kernel.bmp
File : logo_uboot.bmp
File : cache.img
File : u-boot.bin

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
 -> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key 
3. Insert cable

 ====  Wait for phone...

Phone found! [ 15 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
PMTManager : Load 0x17 records
PMTManager : PMT Update Ok!
Flashing now

[FlashProc] : CODE  
Current ID : PRODNV
Current File : prodnv.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : ERASEUBOOT
Current Part : uboot
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID   : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : MODEM_W
Current File : wmodem.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : DSP_W
Current File : wdsp.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : MODEM_WCN
Current File : wcnmodem.bin
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : BOOT
Current File : boot.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : RECOVERY
Current File : recovery.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : BOOTLOGO
Current File : logo_kernel.bmp
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : CODE  
Current ID : FASTBOOT_LOGO
Current File : logo_uboot.bmp
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!

[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache.img
Flashing now ... 
[FlashProc] : Ok!

[FlashProc] : ERASE 
Current ID   : ERASEMISC
Current Part : misc
[FlashProc] : Ok!

[FlashProc] : BOOTCODE
Current ID   : UBOOTLOADER
Current File : u-boot.bin
Flashing now ... 
[FlashProc] : Ok!


Elapsed: 00:04:24

Reconnect Power/Cable!