What's new
By:
PinoyTechnician

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Successfully Repaired Phones by Ultimate Multi Tool

mi2016116 done

Operation : Disable Mi Account
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM72)
Driver Info : Lenovo Inc., leusbser.sys, 2.0.9.6
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600500 [8917] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8917.ufl]...Done
Executing Loader...OK
Hardware* : 8917, eMMC, 16 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi Redmi 4A [msm8937]
Software : MMB29M, V8.2.6.0.MCCMIDL [Wed Mar 29 19:31:07 WIB 2017]
Android Ver. : 6.0.1
Reading Data...Done
Preparing Data...Done
Trying to Disable Mi Account...Done
Operation Finished.
Module Ver. 1.1.2
 
Vivo V5s 1713

FRP DONE




Port : ADB Interface
Baud Rate : Not Applicable
Device : Motorola
Operation : Reset FRP
Searching for Device... Found
Model : vivo 1713
Version : 6.0
Hardware : mt6755
Baseband : MOLY.LR11.W1603.MD.MP.V17.P163, 2017/07/18 14:58
SIM Card : ABSENT,ABSENT
CPU : arm64-v8a
Type : Unknown
MEID(1) : Null/Empty
Root : Not Rooted
Resetting FRP Lock... Done
Operation Finished.
Elapsed Time: 00:08
[Module Ver. 4.0]
Log Saved to Logs\170917_175106.log
 
demo

Vivo V5s 1713 HOW TO REMOVE ENGR


Port : ADB Interface
Baud Rate : Not Applicable
Device : Oppo
Operation : Demo Reset
Searching for Device... Found
Model : vivo 1713
Version : 6.0
Hardware : mt6755
Baseband : MOLY.LR11.W1603.MD.MP.V17.P163, 2017/07/18 14:58
SIM Card : ABSENT,READY
CPU : arm64-v8a
Type : Unknown
MEID(1) : Null/Empty
Pushing Data... Done
In UMT Demo Reset click on Factory Reset.
Click on Yes, then click Activate on Device Administrator Prompt.
Operation Finished.
Elapsed Time: 00:14
[Module Ver. 4.0]
Log Saved to Logs\170917_182756.log
 
S90-a openline

HOT LENOVO S90-A UNLOCKING

OK OK 1K LOCK GLOBE.





DIAGNOSTIC MAHIRAP GAWIN

PM NALANG PAANO...
 
matanong lang,yang mrt b sir full flash kelangan ng internet pra maopen gaya ng mrt?
 
a720f frp 7.0 first sa ant

a720f frp 7.0 first sa ant


Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM10 : SAMSUNG Mobile USB Modem #3
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-A720F
IMEI: 355758083980049
Software: A720FXXU2BQGB/A720FOLB2BQG9/A720FXXU2BQG7/A720FXXU2BQGB
Init Download Mode... OK
Port: COM13 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: LSI7880 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:50
[Ultimate Samsung Flasher v1.2]
 
LG-K220dsZ frp

LG-K220dsZ


Port : COM15 : LGE Mobile USB Serial Port (COM15)
Baud Rate : 115200 (Auto)
Device : LG Android
Operation : FRP Reset (Universal)
Opening Port... OK
Reading Phone Information... OK
Model : LG-K220dsZ
SW Ver. : LGK220dsZAT-00-V10g-ESA-XX-MAY-30-2017
And. Ver. : 6.0.1
IMEI : 358942070839775
Prd. ID : CD22S170121003008
HW Ver. : rev_10
LAF Ver. : 1.1
Reading Partition Data... OK
Erasing FRP Lock... Done
Operation Finished.
Elapsed Time: 00:07
[Module Ver. 4.2]
Log Saved to Logs\171101_110331.log
 
Cloudefone excite 352g

CLOUDEFONE EXCITE 352G

UNLOCK DONE



Port : COM65 : Qualcomm HS-USB Diagnostics 9025 (COM65)
Baud Rate : 921600
Device : QC Universal
Operation : Read Codes
Opening Port... OK
Reading Information... OK
Compile : Apr 3 2013 22:36:38
Release : Jun 12 2012 02:00:00
Hw Ver. : UDMCKOLY
IMEI : 357834050837930
Reading Personalization Data... OK
Found Code Set
NCK : 05337931 Locked
NSCK : 63342159 Unlocked
CCK : 66702384 Unlocked
SPCK : 37970203 Unlocked
SIM : 09805312 Unlocked
Port Closed.
Operation Finished.
Elapsed Time: 00:02
[Module Ver. 4.3]
Log Saved to Logs\171116_162139.log
 
Asus X00BD frp

Asus X00BD



Port : Fastboot Interface
Baud Rate : Not Applicable
Device : Generic
Operation : Qualcomm FRP Reset
Searching for Device in FastBoot Mode... OK
Reading Information... OK
FastBoot Ver. : 0.5
Product : MSM8610
Warranty : Yes
Bootloader : Locked
Bootloader is Locked. FRP Reset may fail!
Removing FRP Lock... Done
Operation Finished.
Elapsed Time: 00:02
[Module Ver. 4.3]
Log Saved to Logs\171120_134418.log
 
g600fy frp

g600fy frp




Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM19 : SAMSUNG Mobile USB Modem #2
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: MSM8916 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
 
j710gn 7.0 reset frp in 3 seconds only

j710gn 7.0 reset frp in 3 seconds only

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM76 : SAMSUNG Mobile USB Modem #20
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-J710GN
IMEI: 358447076037515
Software: J710GNDXU3BQH6/J710GNOLB3BQH6/J710GNDXU3BQH2/J710GNDXU3BQH6
Init Download Mode... OK
Port: COM19 : SAMSUNG Mobile USB Modem #2
Reading Data from Phone... Done
Chipset: LSI7870 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:49
[Ultimate Samsung Flasher v1.3]
 
mukhang maganda tong dongle na to di ko pa natatry to makabili nito magkano po umt dongle bossing? octopus dongle samsung + lg lite, eft, cm2 saka nck dongle pro lang meron ako salamat po sa pagshare
 
oppo CPH1611

1500 ok na

Port : COM31 : Qualcomm HS-USB Diagnostics 9025 (COM31)
Baud Rate : 921600
Device : Oppo Others
Operation : Network/Region Unlock
Opening Port...
Reading Information... OK
Compile : Jul 15 2017 10:22:17
Release : Jul 03 2017 05:00:00
Hw Ver. : 8976.gen
Build : MPSS.TA.2.2.c7-00034-8976_GEN_PACK-1.95067.1.105770.1_VENDOR
IMEI[1] : 863596033474134
IMEI[2] : 863596033474126
Unlocking Phone... Done
Please reboot phone now.
Operation Finished.
Elapsed Time: 00:03
[Module Ver. 4.5]
Log Saved to Logs\171225_173407.log
 
sm g600fy frp

sm g600fy frp

g600fy frp
no need flash
no need adb modem

done in 5 seconds lang


Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM16 : SAMSUNG Mobile USB Modem #2
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: MSM8916 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:20
[Ultimate Samsung Flasher v1.3]
 
vivo 5s plus FRP

vivo 5s plus vivo 1611




Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM15)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4F FF8F02A0E7FAD2
Initializing Protocol...OK
Sending Loader connecting to FULLFLASH........Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware* : 8953, eMMC, 64 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1611 [msm8953]
Software : N2G47H release-keys, eng.compil.20180115.192046 [Mon Jan 15 19:20:46 HKT 2018]
Android Ver. : 7.1.2
Resetting FRP Lock......Done
Operation Finished.
Module Ver. 1.7
 
Preview Default SKYFIRE 2.0

SKYFIRE 2.0 HANG LOGO DONE
TRICK PALITAN LANG IMEI

PHONE BACK TO NORMAL

AYUS.... NO NEED FLASH NAKAKA IMPOSIBLE

Port : COM25 : Qualcomm HS-USB Android DIAG 901D (COM25)
Baud Rate : 921600
Device : Qualcomm Android
Operation : Write IMEI [UMT Method [1]]
Opening Port... OK
Reading Phone Information... OK
Compile : Mar 20 2013 15:11:57
Release : Mar 20 2013 15:11:57
Hw Ver. : QDOSKOLY
Build : 8X25Q-QDOSKOLYM-3010
IMEI [1] : 866853018001631
IMEI [2] : 866853018001649
Method : UMT Method [1]
Preparing Data... Done
Writing IMEI 1 [350786868685751]... Done
Writing IMEI 2 [350686785785751]... Done
Rebooting Phone... Done
Please reboot maunally if does not reboot automatically.
Operation Finished.
Elapsed Time: 00:05
[Module Ver. 4.8]
Log Saved to Logs\180214_141500.log
 
Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM43 : SAMSUNG Mobile USB Modem #16
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-T560NU
IMEI: );UN(C000092681
Software: T560NUUES1BPL1/T560NUXAR1BPL1/T560NUUES1BPL1/T560NUUES1BPL1
Init Download Mode... OK
Port: COM10 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: MSM8916 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
---------------- IMPORTANT ----------------
Wait for phone to reboot and turn on fully or TURN ON manually.
Once Phone is completely ON, wait a few minutes and then.
goto Menu > Settings > Backup and Reset and do Factory data Reset.
Elapsed Time: 00:56
[Ultimate Samsung Flasher v1.3]
 

Mi redmi 2 2014818


hang on logo done

1k agad...







Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM15)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8916_014.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware* : 8916, eMMC, 8 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi 2014811 [msm8916]
Software : KTU84P, V16.2.8.0.KHJCNBK [Wed Jan 14 12:06:23 CST 2015]
Android Ver. : 4.4.4
Preparing Data...Done
Formatting Userdata...Done
Finalizing...Done
Operation Finished.
Module Ver. 1.7
 
Asus ZenFone Zoom S – ZE553KL(Z01H) FRP

Asus ZenFone Zoom S – ZE553KL(Z01H)
FRP DONE



Fastboot Device Found

-- Reading Device Info.

-- Version : 0.5
-- Product : MSM8953
-- Serial No : H5AZCY02N559FDW
Sending Data : Done
Executing Exploit : Done

Switching Device to Adb Mode
Please Check device screen Allow Adb Authorization if Prompted.
Waiting for Device to Connect Again
Device Found
MODAL : ASUS_Z01HDA
MANUFUCTURER : asus
ANDROID VERSION : 7.1.1
CPU : arm64-v8a
HARDWARE : qcom
BUILD DATE : 2017年 06月 20日 星期二 23:52:02
BUILD TAGS : release-keys

Checking Root Status !!
Not Rooted
Resetting Frp Please wait...

Frp Reset done

Elapsed Time : 0 minutes - 3 seconds
 
Alcatel ONETOUCH Pixi 3 [8] 9022X FRP DONE

Alcatel ONETOUCH Pixi 3 8 9022X FRP DONE

WOW MAGIC PAANO KAYA NAG ON ADB?

PM PM NALANG...



Device:
Operation: Reset FRP
Searching for Device... Found
Model: 9022X
Baseband: MSM8909.LA.1.1.c7.1-113370104-
Bootloader: L9DMH0H0BR00
PDA:
Android Version: 5.1.1
Resetting FRP Lock... Done
---------------- IMPORTANT ----------------
Accept Agreement on phone to enter Home Screen.
Goto Menu > Settings > Backup and Reset > Factory data reset.
Operation Finished.
Elapsed Time: 00:10
[Ultimate Samsung Flasher v1.3]
 
SM-J710F 7.0 frp done

via adb....

Device: SM-J710F
Operation: Reset FRP
Searching for Device... Found
Model: SM-J710F
Baseband: J710FXXU4BRA5
Bootloader: J710FXXU4BRA2
PDA: J710FXXU4BRA2
Android Version: 7.0
Resetting FRP Lock... Done
---------------- IMPORTANT ----------------
Accept Agreement on phone to enter Home Screen.
Goto Menu > Settings > Backup and Reset > Factory data reset.
Operation Finished.
Elapsed Time: 00:10
[Ultimate Samsung Flasher v1.3]
 
SM-G610F FRP 7.0 DONE 5 SECONDS ONLY

Device: SM-G610F_NEW
Operation: Apply FRP Patch
Port: COM74 : SAMSUNG Mobile USB Modem #30
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-G610F
IMEI: 351692091198340
Software: G610FDDU1BQL9/G610FOJV1BQL2/G610FDDU1BQJ4/G610FDDU1BQL9
Init Download Mode... OK
Port: COM10 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: LSI7870 [HiSpeed]
Applying Patch Data... . . Done
Closing Session... Done

Device: SM-G610F_NEW
Operation: Reset FRP
Searching for Device... Found
Model: SM-G610F
Baseband:
Bootloader: G610FDDU1AQA4
PDA: G610FDDU1BQL9
Android Version: 7.0
Resetting FRP Lock... Done
 
sm-n9208 7.0 frp done in 5 seconds lang

gawin ko 10 mins 1500 pag 1 hour 1k saan ninyo gusto madam...
sabi ba naman sa 1500 daw.. e di wow..

N9208DX FRP Done 7.0 latest sec


Operation: Exynos (UFS) FRP Reset
Port: COM10 : SAMSUNG Mobile USB Modem
Checking for Device... Found [Download Mode]
Reading Data from Phone... Done
Chipset: LSI7420 [HiSpeed]
Port : COM3 : Z3X BOX Serial Port (COM3)
Please keep holding VOL Down + Power buttons together... Phone Found, LEAVE Buttons!
Preparing Device... Done
Erasing FRP Data... Done
Erasing Samsung Account Data... Done
Erasing EE Data... Done
Operation Finished.
Elapsed Time: 00:57
[Ultimate Samsung Flasher v1.3]
 
SM-G920T frp DONE

SM-G920T frp done


Operation: Exynos (UFS) FRP Reset
Port: COM33 : SAMSUNG Mobile USB Modem #12
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-G920T
IMEI: 357746065648302
Software: G920TUVS6FRA3/G920TTMB6FRA3/G920TUVS6FRA3/G920TUVS6FRA3
Init Download Mode... OK
Port: COM10 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: LSI7420 [HiSpeed]
Port : COM23 : Z3X BOX Serial Port (COM23)
Please keep holding VOL Down + Power buttons together... Phone Found, LEAVE Buttons!
Preparing Device... Done
Erasing FRP Data... Done
Erasing Samsung Account Data... Done
Erasing EE Data... Done
Operation Finished.
Elapsed Time: 01:19
[Ultimate Samsung Flasher v1.3]
 
SM-A520F A520FXXU3BQLA 7.11 done in seconds

Device: Samsung Device
Operation: Reset FRP (New Method)
Port: COM16 : SAMSUNG Mobile USB Modem #3
Checking for Device... Found [Normal Mode]
Reading Phone Information... OK
Model: SM-A520F
IMEI: 352602098513119
Software: A520FXXU3BQLA/A520FAUT3BQL2/A520FXXU3BQL1/A520FXXU3BQLA
Init Download Mode... OK
Port: COM9 : SAMSUNG Mobile USB Modem
Reading Data from Phone... Done
Chipset: LSI7880 [HiSpeed]
Resetting FRP Lock Data... . Done
Closing Session... Done
 
You must log in or register to reply here.
Back
Top