Operation steps:
1、install Android flash tools as below orders:
1) First, install “ iSocUSB-Driver-Setup-1.2.0.exe”
2) Second, install “ IntelAndroidDrvSetup1.5.0.exe”
3) Finally, install “PhoneFlashTool_5.3.4.0_win32.exe”
Procedure:
Step 1. run “Phone Flash Tool”, click “Browser” button, in pop-up window load burning file “flash.json” , as below:
Step 2. then rewrite “Configuration” content as “recover”, as below:
Step 3. start tablet and enter Android os, shutdown. Then long-press “power, vol up, vol down” 3 buttons at the same time, until “DNX FASTBOOT MODE…” words appear, as below:
Step 4. connect tablet with computer, after computer recognize the device driver, flash tool will appear “Start to Flash” button, it means that tablet connects computer successfully.
Step 5. click “Start to Flash” button, it start to burn firmware.
Step 6. the process is as below, it will take long time, just wait patiently. Don’t do other unnecessary operations in process.
Step 7. when process bar shows 100%, it means that flash is completed. Tablet will auto reboot. Remove USB cable on tablet, close the flash tool on computer.
Done and Enjoy!!!
Link Here: https://drive.google.com/file/d/1f2Mx3OqX5w8kPdgNnt1tmuu2OJdHuHTg/view?usp=share_link