J
j4tech
Anonymous
tracfone lg 900g succesfully convert using octo.[Reference]
good day po mga boz!
share ko lang po.
tracfone lg 900g convert to gw300 using octopus.
TOOLS :
1. octopus
2. micro usb
3. original / carrier sim
HERES THE PROCEDURE ( sensya na sa english ko mga master )
how to flash/convert lg 900g to gw300.
-open octopus
-select tab "lg analog devices"
-select gw300 for phone model.
-use micro usb cable.
-connect phone to cable with battery, powered.
-pop-up menu on phone, select data services.
-then phone will be detected.
-after detecting & installing usb driver of gw300.
-select right comport.
-remove phone from cable, remove battery.
-tick connect then insert cable without battery.
-put flashfile "GW300AT-00-V10c-CIS-XXX-OCT-22-2009+0.oct".
-read fullflash.
-read eeprom.
-after back up,tick write firmware.
-tick read codes.
next we need the original carrier sim.
-insert original sim then type 2945#*71001#.
-then menu will pop-up, select unlock sim.
-select network lock.
-press yes.
then enter unlock codes twice.
-done.
HERES THE LOGS
Welcome to Octopus box software version 1.7.5
----------------------------------------------------------------------------------
Platform: LG Analog Devices
Selected port: USB
Selected baudrate: 921600
Selected model: GW300
Disconnect battery and connect USB cable to phone...Canceled!
----------------------------------------------------------------------------------
Platform: LG Analog Devices
Selected port: USB
Selected baudrate: 921600
Selected model: GW300
Disconnect battery and connect USB cable to phone...
Phone found.
Sending preloader...OK
Reconnecting phone...OK
Sending first loader...OK
Sending second loader...OK
Flash ID: ECB1
Flash type: Samsung
Reading info. Please wait...OK
IMEI: 012192-00-XXXXX-X
Reading Full flash...
Reading Full flash done!
Reading EEPROM...
Reading EEPROM done!
Opening "GW300AT-00-V10c-CIS-XXX-OCT-22-2009+0.oct"...OK
Writing Total BIN...
Repair mode: No
Writing Firmware...
Writing Firmware done!
----------------------------------------------------------------------------------
Reading codes. Please wait...OK
Unlock code: 0931 5810 3792 6390
Unlock code: 0931 5810 3792 6390
Unlock code: 0931 5810 3792 6390
To finish the operation, please perform the following steps:
1. Insert the original SIM card and type 2945#*71001#
2. Enter the code.
3 pcs po yan.
note : download na lang po kayo ng flashfile sa support ng octo.
God bless us all...
share ko lang po.
tracfone lg 900g convert to gw300 using octopus.
TOOLS :
1. octopus
2. micro usb
3. original / carrier sim
HERES THE PROCEDURE ( sensya na sa english ko mga master )
how to flash/convert lg 900g to gw300.
-open octopus
-select tab "lg analog devices"
-select gw300 for phone model.
-use micro usb cable.
-connect phone to cable with battery, powered.
-pop-up menu on phone, select data services.
-then phone will be detected.
-after detecting & installing usb driver of gw300.
-select right comport.
-remove phone from cable, remove battery.
-tick connect then insert cable without battery.
-put flashfile "GW300AT-00-V10c-CIS-XXX-OCT-22-2009+0.oct".
-read fullflash.
-read eeprom.
-after back up,tick write firmware.
-tick read codes.
next we need the original carrier sim.
-insert original sim then type 2945#*71001#.
-then menu will pop-up, select unlock sim.
-select network lock.
-press yes.
then enter unlock codes twice.
-done.
HERES THE LOGS
Welcome to Octopus box software version 1.7.5
----------------------------------------------------------------------------------
Platform: LG Analog Devices
Selected port: USB
Selected baudrate: 921600
Selected model: GW300
Disconnect battery and connect USB cable to phone...Canceled!
----------------------------------------------------------------------------------
Platform: LG Analog Devices
Selected port: USB
Selected baudrate: 921600
Selected model: GW300
Disconnect battery and connect USB cable to phone...
Phone found.
Sending preloader...OK
Reconnecting phone...OK
Sending first loader...OK
Sending second loader...OK
Flash ID: ECB1
Flash type: Samsung
Reading info. Please wait...OK
IMEI: 012192-00-XXXXX-X
Reading Full flash...
Reading Full flash done!
Reading EEPROM...
Reading EEPROM done!
Opening "GW300AT-00-V10c-CIS-XXX-OCT-22-2009+0.oct"...OK
Writing Total BIN...
Repair mode: No
Writing Firmware...
Writing Firmware done!
----------------------------------------------------------------------------------
Reading codes. Please wait...OK
Unlock code: 0931 5810 3792 6390
Unlock code: 0931 5810 3792 6390
Unlock code: 0931 5810 3792 6390
To finish the operation, please perform the following steps:
1. Insert the original SIM card and type 2945#*71001#
2. Enter the code.
3 pcs po yan.
note : download na lang po kayo ng flashfile sa support ng octo.
God bless us all...