REFERENCE TUT HUAWEI B593s-22 Debranding

[stigmatized]

HUAWEI B593s-22 Debranding

TOOLS:

Multicast Update Tool & Firmware

PROCEDURE:

1. Connect Modem to your PC's LAN port

2. Turn your modem ON.

3. Open Multicast & Follow screenshot settings

4. Before Clicking Start button in the MULTICAST Software, Make sure to turn off the modem first.

5. Click Start Button and turn the modem on, and when the signal bars are full, it means that the debranding is finished..

6. Click Stop and Close MULTICAST
.
7. Turn Modem OFF then Turn it ON again (RESTART).

8. Now Open GUI in your browser and you will see HUAWEI logo instead of your carrier/network's logo.

CREDITS to the author in this LINK​

 

[ant_tech]

ngayon ko lang napansin ang thread ni chaos79, sa SB salamat dito boss

 

[Jhem]

thanks dito TS wala pa ako ganyan kaya di maudubukan

 

[azero_357]

Pasubok din po ako master

 

[jason244]

sir tulgan u naman po ako sa debranding na modem ko. after ko kac mag debrand d ko na mapsok ung gui using defualt pass a user. tnx

 

[bronce]

sir/boss TS,

hindi po ba mababago ang ginawa naming password? if mabago,anu naman po ang default user/pass nito?

TIA po,

 

[wakhuz]

para saan po ba ang Debranding na ito boss

 

[minersss]

tip lang po sa mga naka debrand na .. WAG nyu eh HARD reset dahil mawawala lahat pati password nyu at gui IP

 

[nhoy_tech]

pa try nito boss pag my mpadaan

 

[Junel_05]

boss.. pa update ng link..

 

[Henryraf]

TUT HUAWEI B593s 22 Debranding

Mga sir Pa tut naman po kasi Gusto ko full admin ung 936 ko kaso po
ayaw na mag USB MODE STEADY na lang sa BLUE LIGHTlang

pa help po sa naka fix nito salamat....

 

[kurarapnit]

Telnet is not recognizer sa cmd. Any solutions sir

 

[samad]

sir ano user pass