REFERENCE Vivo 1726 Password & FRP Remove Done via NCKDongle

[Winsam]

Vivo 1726 Password & FRP Remove Done via NCKDongle

-POWER ON PHONE
-CONNECT USB CABLE
-OPEN NckDongle AndroidMTK
-FORMAT-RESET
-PHONE SETTING
*Vivo
*Y83 Pro
-CLICK [META]Reset To Factory Default
-REBOOT PHONE AUTO DETECT NAPO YAN

Action : Reset to factory default.
Selected Model: Vivo:Y83 Pro
Exe version: NCKDongle AndroidMTK 2.6.1
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[18]Detected: MediaTek PreLoader USB VCOM Port (COM18)
\\?\usb#vid_0e8d&pid_2000#6&34ba95f&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[46]META Port Detected: MediaTek DA USB VCOM (Android) (COM46)
USB\VID_0E8D&PID_2007\6&34BA95F&0&6
Start sync target, waiting responce.....
ChipID: MT6765,S01
Using Algo 5.
Resetting phone step 1, wait....
Resetting phone step 2, wait....
ClearValue ok.
FormatTCard ok.
[helio]Wait untill phone will start charging.
[0]All done.

Keep VOL+ button untill inserting USB cable.
Detected : MediaTek PreLoader USB VCOM Port (COM18)
Boot mode: Preloader
Phone detected...Please wait
BBCHIP: 6765 0 ca00
Using Algo 5.
Helio MT6765 phone detected, swithing to helio api
Loading Custom Preloader
Helio enabled DRAM in First Da: TRUE
BBCHIP MT6765
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010052443634 : 000000000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
Phone have OTP partition.
Starting helio frp, not disconnect phone untill done
[HELIO]Format partition, please wait...
[0]FRP Reset Done.
[HELIO]Format partition, please wait...
[1]FRP Reset Done.
[helio]Wait untill phone will start charging.
[0]All done.​