Vivo 1818 Passcode/Frp Done via UMT QcFire 5.08

[EJSCriminal]

Device : Vivo V15 Pro
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM46)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1500900 [SM6150] 03007300
OPK_DATA : F754F13EE91BF54295CA1FBD64D182067440B35FC41B798A539670EA259771BA
Initializing Protocol...OK
Preparing Loader...Done
Sending Loader [V15_Pro]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : SM6150, UFS, 128 GB
LU Count : 6 [0x01D83800] [0x00000800] [0x00000800] [0x00002000] [0x00040000] [0x00004000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [65536], Out: 1048576, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1818 [PD1832F_EX]
Brand : vivo
Prod.Name : PD1832F_EX
Software : PKQ1.181203.001 release-keys, compiler06202330 [Thu Jun 20 23:29:40 CST 2019]
Android Ver. : 9
Patch Level : 2019-06-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 5.8

PROCEDURE

TEST POINT

1. Open UMT QcFire 5.08 -> Read & Tools -> Brand: Vivo, Model: V15 Pro -> Click Format FS.
2. Use Tweezer in the TP area then insert USB Cable. Take note, remove the battery before proceeding.

​

 

[GEMICHA]

tested na nga...may reference narin tayo nito..thanks idol

 

[EJSCriminal]

tested na nga...may reference narin tayo nito..thanks idol

Your welcome sir.