REFERENCE Vivo 1906 (Y11) Password Done via UMT

[EJSCriminal]

Vivo Y11

Tools:

1. UMT Dongle
2. Data Cable
3. Tweezer

EDL POINT:

Procedure:

1. Open UMT QcFire
2. Read & Tools
3. Vivo
4. Y11
5. Click Vivo FS / FRP
6. Remove battery
7. Insert the data cable to the unit
8. Use tweezer and point it to the EDL POINT
9. Insert the data cable to the system unit in order to detect the phone​

Logs:

Device : Vivo Y11
Operation : Vivo Format FS / FRP Reset
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM47)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1F00B00 [8937] 00000000
OPK_DATA : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 1 [0x03A3E000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1906 [PD1930F_EX]
Brand : vivo
Prod.Name : PD1930F_EX
Software : PKQ1.190616.001 release-keys, compiler02201901 [Sat Feb 20 19:00:13 CST 2021]
Android Ver. : 9
Patch Level : 2021-02-01
Formatting userdata...Done
Resetting FRP Lock...Done
Wipe cache / userdata from Recovery and reboot.
First startup may take 2-5 minutes.
Operation Finished.

Done.

​