REFERENCE Vivo 1920 S1 Pro Password & FRP Done via UMT

[EJSCriminal]

S1 Pro

Tools:

1. UMT Dongle
2. Tweezer
3. Data Cable

EDL Point:

Procedure:

1. Open UMT QcFire
2. Read & Tools
3. Vivo
4. S1 Pro
5. Format FS
6. Execute
7. Proceed test point (Note: Remove battery first)
8. Insert data cable

Logs:

Device : Vivo S1 Pro (PD1945F)
Operation : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM47)
Driver Info : Qualcomm Incorporated, qu_usb_serial.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A01000 [SDM665] 03007300
OPK_DATA : F754F13EE91BF54295CA1FBD64D182067440B35FC41B798A539670EA259771BA
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM665_001]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : SDM665, UFS, 128 GB
LU Count : 6 [0x01D81800] [0x00000800] [0x00000800] [0x00004000] [0x00040000] [0x00004000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device : vivo vivo 1920 [PD1945F_EX]
Brand : vivo
Prod.Name : PD1945F_EX
Software : PKQ1.190626.001 release-keys, compiler04111849 [Sat Apr 11 18:48:25 CST 2020]
Android Ver. : 9
Patch Level : 2020-04-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 6.8

Done.