Vivo Y30
ISSUE: Password & FRP
Tools:
1. UMT Dongle
2. USB Data Cable
Procedure:
1. Open UMT MTK V4.9
2. Click MTK One Click
3. Check Reset / Format & Reset FRP
4. Execute
5. Hold VOL UP + DOWN and connect USB Cable.
Logs:
Operation : MTK One ClickISSUE: Password & FRP
Tools:
1. UMT Dongle
2. USB Data Cable
Procedure:
1. Open UMT MTK V4.9
2. Click MTK One Click
3. Check Reset / Format & Reset FRP
4. Execute
5. Hold VOL UP + DOWN and connect USB Cable.
Logs:
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM4 [USB Serial Device (COM4)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&21340359&0&4#{f9f3ff14-ae21-48a0-8a25-8011a7a931d9}
Chipset: 0x0707, [MT6768] [Helio P65/G85 k68v1]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
MEID: 0DBD8B3A7F89932E6170FB37F8EE291B
Preparing device...
-- Success!
Preloader saved as : preloader_oppo6769_220226_140754.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : USB Serial Device (COM4)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
Could not read specified bytes.
-- Could not read!
Could not read specified bytes.
Userdata is NOT ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.9]
Done.